Delica Canada | Mitsubishi Van Club

Hello all, thanks for the emails , the oil is going to be picked up now regularly from a local delica owner going to start brewing B100,
Noel

Im guessing its around 200+L if that helps to motivate
and you can keep the source if you like...

hello, I am still unable to drive after a bad accident, I have 2 places that really need oil picked up from, if you are willing to go pick it up, you can have all they have, and hopefully you will go again in a few weeks, Both locations are in the downtown core, please let me know and we can exchang...

hello, piss yellow is the water from japan with probably a trace of old coolant, not to be confused with the bright yellow slick long life coolant...if you have coolant has not been flushed and seems like just water. you need to run some vinager in with your coolant , a couple liters, in your coolan...

perhaps if you were to cut them at the ends, where if you have them wrong, your only out an inch of hose... not starting in the middle... I would normally be happy to pm you my phone number so we can talk, but I was in a very big vehicle accident and have a left brain injury, my speech is all messed...

I live in Victoria, there are a few co-ops here also, but I also have a few restraints that are very loyal to me, I don't pay anything for the oil, and I generally have to much oil to use, if you figure out a way to use an under vehicle tank. you can have a bunch of oil, if you have duel tanks on yo...

if you plan to use the marine fuel can for INSIDE your van, i have an offer for you, re-sell the fuel can , find a spare fuel tank for the bottom of your van and I will GIVE you 200L of FREE wvo as a prize, NO JOKE. ive seen to many people who put their fuel/ wvo inside the van, and over time as it ...

Intakes and most quality intercoolers are made from 5000. & 7000 series aluminum, they are corrosion resistant , also why kits used for aluminum boats , the ocean is a tad more corrosive than bug juice ... Brain box holders for ecu's are made from cheap crappy alum , the only purpose is slight d...

you dont have enough fluid or a strong enough pump to make the pump go on automatic, you will drain the bag or resovoir in no time and then burn out the pump, spraying the intercooler with water from a garden sprinkler is pointless, you will just add rust to the glow plug connectors, really its poin...

looks like some old water injection system, Im allready using a water/metanol injection in my L400 and my welding truck, it definatly makes a difference, I talked him out of the exhaust heating the fuel line idea, right now I have a stainless steel heat exchanger that is heated by the engine coolant...

Nice find Jess!!

Big bird, have you thought about putting in a set of D44's or some solid toy axels? shafts are one ton chev thick, lockers are plentiful and its not that hard of a mod if you have some steel working skills. only down side is the birfs but you can go with chromoly ones or long fields...

If on your way back home, you come to the island, I can load you up with as much as you can hold. I just gave away 23 cubes, and am down to about 4000L of ready to go wvo. for some reason the river of wvo that flows through Victoria has made a consistant stream past my door...

If you want to measure your air flow from your air filter, put in an air filter meter, you can get them on most heavy duty trucks, easy to plumb in and easy to read.

if you are really wanting to know how much boost you are getting from your turbo, or more importantly, to your motor, you need to take off the egr valve, put on a blanking plate with a welded bung/fitting into the plate that goes into your intake manifold put the boost/pressure gauge there, its righ...