Delica Canada | Mitsubishi Van Club

I have a set of fog lamps that were on my old L300. I am trying to get rid of them as well as some belts and other parts. Yours for the taking if you can pick them up in Edmonton. Thanks!

Its a diesel

I would imagine its this breather hose issue cause the cap is on there super tight and its still spilling out. Can anyone describe to me how to locate the breather hose? Does anyone have a picture? Also whats the best way to go about unplugging it?

Thanks

Hey guys,

so for some time now oil has been coming out of the oil cap and leaking like crazy. I've replaced the cap and that is obviously not the issue. Someone told me that maybe the crank case isn't breathing properly?

Has anyone had a similar issue and found any probably causes/fixes?

Thank you

Got a set of rims to get rid of, I live in Edmonton so if you want them, PM me and we can arrange a time for you to pick them up

Ok great thanks for the reply! I was about to tear the face off the switches so I'm glad you pointed me in the right direction

A little while ago I was sliding the switch from inside air to outside air and it appeared to have broken, now the switch slides super easy and appears to do nothing. There is noticeably less heat as well and the cab fogs up really bad. I'm just wondering if anyone has run into this problem and solv...

Hey guys, I ordered a new roller for the sliding door. It came attached to the arm but my door is modified and I need to get this roller off the arm it came with. Does anyone know how to get the pin out that holds them together?

That's exactly what I want. How'd you get the bench? Is it an L400 bench? Was it hard to install? Did you make those brackets yourself?

I'd like to replace the rear bench in my L300 with one that flips up against each wall so I have more space to lay out on the floor of my delica.

Has anyone tried a mod like this? Is it possible?

Yea I've found a few suppliers. All charging $92 for brand new. I'm still holding out for a used one.

well against all odds, I completed this project today! Thank god finally! Now I just have to fix the sliding door..

Perhaps this will help: http://www.delica.ca/search_results.php?cx=partner-pub-7750176904128382%3A2139089753&cof=FORID%3A10&ie=UTF-8&q=tailgate+latch&sa=Search&siteurl=www.delica.ca%2Fforum%2Freplacing-gate-latch-15935.html&ref=www.delica.ca%2Fforum%2Fadvanced-search%2Factiv...

Perhaps this will help: http://www.delica.ca/search_results.php?cx=partner-pub-7750176904128382%3A2139089753&cof=FORID%3A10&ie=UTF-8&q=tailgate+latch&sa=Search&siteurl=www.delica.ca%2Fforum%2Freplacing-gate-latch-15935.html&ref=www.delica.ca%2Fforum%2Fadvanced-search%2Factiv...

The alignment bumpers is the door jam need to be checked for proper position. The lock mechanism inside the door can get dirty and the interlock mechanism won't move all the way to properly engage the main catch...or pin. If the hatch door has dropped a little due to hinge bolt tightness/alignment ...

Hey guys I am looking to replace this part of the sliding door mechanism in the picture below. http://s29.postimg.org/422mz295j/IMG_1359.jpg mine is all warped and does not ride properly on the track. I have so far only been able to find one supplier but he wants a lot of money for that little metal...