help! need engine 4g64 w

Post Reply
jackleg
Posts: 10
Joined: Fri Nov 05, 2010 4:34 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: van/wagon 1989

help! need engine 4g64 w

Post by jackleg »

i made a mistake by trying to make it home when radiator started to fail... warped head. no problem, i have replaced them before, but, i waited too long to tear it down. now cylinders are stuck. what should i do. need and engine or entire van... ??? thanks...
jackleg
Posts: 10
Joined: Fri Nov 05, 2010 4:34 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: van/wagon 1989

help! need engine 4g64 w

Post by jackleg »

just wondering, how hard is it to replace engine? from top or bottom? anyone with experience? thanks
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

help! need engine 4g64 w

Post by Growlerbearnz »

Can't help with the new engine, but swapping the old one out is fairly straightforward. It's done through the top, through the passenger door. Here's a writeup on swapping the diesel with pictures showing how it comes out. http://www.delica.ca/forum/viewtopic.php?f=6&t=18559
Nothing says "poor workmanship" more than wrinkles in the duct tape.
jackleg
Posts: 10
Joined: Fri Nov 05, 2010 4:34 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: van/wagon 1989

help! need engine 4g64 w

Post by jackleg »

Growlerbearnz, thanks for reply.... hope all is well..
originalkwyjibo
Posts: 34
Joined: Sat Oct 30, 2010 11:07 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 88MitVan/Wgn,90 crg,88 4WDToyotaVan
Location: Tacoma Wa

help! need engine 4g64 w

Post by originalkwyjibo »

Early 90s trucks. I believe you have to swap some things like manifolds.
Post Reply

Return to “Mitsubishi Vanwagon”