Delica Canada | Mitsubishi Van Club

Want to have access to all Mitsubishi models part numbers based on a chassis number? Here is Mitsubishi ASA (Aftersales Support Application) which is used by dealers worldwide.

Download page: http://www.dsm-club.org/forum/faily/159 ... ation.html

* This download link is provided as required by the owner of the DSM Club site.

Summary

- download RAR archives
- unpack
- mount/burn ISO images
- install ASA
- apply crack
- restart Windows
- run the application

Details

Downloaded files are RAR packages containing ISO images. After unpacking the images (the password is the domain name for http://www.dsm-club.org) you can either burn them on CDs or mount them using DAEMON Tools, Power ISO etc.
Install.
After the installation you have to copy mmData.dll from the folder 'crack' into the corresponding folder i.e.:

jap - c:\MMC\ASA\M00\PROG\
usa - c:\MMC\ASA\M50\PROG\
eur - c:\MMC\ASA\M60\PROG\
asia - c:\MMC\ASA\M80\PROG\

Run MMC.reg from the folder 'crack', reboot Windows.
Windows x64 users should use this REG file: http://files.dsm-club.org/asa/MMCx64.zip

PS. I installed it on 2 PC's and it works.
NB. I believe this post belongs to the FAQ and Downloads but I did not want to put it into a specific model subsection; it is up to moderators where to move it.

Wow great find!!

English Mode enabled:
http://club4g.org/board/general-4g-ecli ... ement.html

Quoted from the link in above post: 'Installation is pretty complicated and I've translated it from Russian.' Really?!

Installation is pretty complicated, to be fair. I got it built and updated, and it works fine.

Things I was able to do: search out a part, and then find what other vehicles use same part. That is very revealing and useful information.

Vantastic ,good one!

Right On!

Good find! I'm in the process of downloading the files at the moment.

I'm curious if anyone has done any cross-referencing between the Japan SW and the USA SW. (assuming USA = Canada = N America for Mitsu's sake)

For example, if you take the Japanese version S/W, select a Japanese market vehicle, choose a part (say, "water pump housing"), presumably the S/W will dutifully spit out a Mitsubishi part number.

If you them enter that part number into the USA S/W, can you then find the vehicle sold in the USA which uses that same part #?

A cross-market, corss-reference table like that would be *very* useful... Wondering if anyone's tried yet.

Tony.

Thanks for providing this!
I am having troubles most likley due to being a computer idiot.
So I down load the zip file then unzip it...and trying to find these "Iso files" to burn....to disc..and thats where Im lost...
When you run the exe and eventually it asks for disc 2 is this the disk with the iso images on?
I am sorry I am a little confused!!
Thanks for your help.