Many of us like to personalize our wheels. Especially those of us with white Deli's (we are so many).
Shaun van Ramen got a little cosmetic surgery the other day. Some touch-ups in spots:
> the spars right behind the doors had the remnants of the "Exceed" decal in the paint as well as the "4wd" on the *left front corner below the windshield - touched them up (see A, B in photo).
> The cactus masher (front bumper) got some touch up. White for now until I decide another colour and get approval.
The new look is the base body panels - painted them black Now I feel Shaun is Shaun.
*Now I can place my mitsumaple decal there!
A New Birthmark
- Shaun Van Ramen
- Posts: 324
- Joined: Wed Nov 03, 2010 1:56 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Exceed
- Location: Vancouver, BC
A New Birthmark
- Attachments
-
- deli_newtrim1.jpg (45.55 KiB) Viewed 3320 times
-
- The details of the job
- deli_newtrim2.jpg (74.66 KiB) Viewed 3320 times
BAHahahahahahaha
- deli1733
- Posts: 231
- Joined: Thu Dec 31, 2009 1:32 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 L-300 94 Pajero LWB
- Location: Merville
Re: A New Birthmark
Cool man how did you get that glue stuff off that holds the exceed sign on?
- joedelica
- Posts: 204
- Joined: Tue Jan 08, 2008 10:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 Exceed XR The Sapporo Can
- Location: VanCity
- Location: VanCity
Re: A New Birthmark
I used a heat gun on low setting to remove the badges on my L300 and L400.
Replaced with Mitsubishi logo.
Joe
Replaced with Mitsubishi logo.
Joe
- Shaun Van Ramen
- Posts: 324
- Joined: Wed Nov 03, 2010 1:56 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Exceed
- Location: Vancouver, BC
Re: A New Birthmark
The "Exceed" and "4WD" decals were already removed when I got it. But they left impressions in the paint (put on wet paint?).
So it was a little sanding, paint, clear coat and then I have to polish a little.
So it was a little sanding, paint, clear coat and then I have to polish a little.
BAHahahahahahaha