I didn't know you used those same handles. I may have to rename the title of my build to give you some credit toojfarsang wrote:nice round up. The wooden handles look familiar
nvanadm's Derelictica
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
Last edited by nvanadm on Fri Apr 27, 2012 7:49 pm, edited 1 time in total.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
Spontaneous photo shoot. Craig had two Pajero's there (one V6 gas and one 2.8 diesel). A fellow delica.ca member (Jonathan) dropped by for some service.
It's not too often you see this many white JDM's in the same area in Ontario...so of course we had to take some pictures.
It's not too often you see this many white JDM's in the same area in Ontario...so of course we had to take some pictures.
- Bonsai
- Posts: 34
- Joined: Thu Jul 22, 2010 8:34 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: OMVIC# 5215108, drive my stock
- Location: London Ontario
- Location: London, Ontario, Canada
- Contact:
Re: nvanadm's Derelictica
We had more Mitsubishis there, they just didn't match!
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
Today I installed a rooftop carrier that I purchased off Kijiji for $80 about a month ago. It's a Thule 250 that was in great shape. I already have the Thule 1050 feet and load bars from the ski rack WE USED TO USE (when we lived in a place where there were actually mountains... a.k.a BC).
BUT THAT ISN'T THE BEST PART....
BUT THAT ISN'T THE BEST PART....
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
A couple week ago I came up with an idea that I haven't seen anyone do yet. So either i'm the only one to actually go through with it or people have thought of it and i'm just an idiot for actually doing it (hopefully not the latter).
Ghetto Awning!!
I found some hooks at a local fastener store The opening wasn't wide enough for the gromets so we cut them a bit Then we painted them black so they wouldn't stand out too much from the carrier
I installed 4 anchor points into the bottom of the rooftop carrier. Installing into the bottom will allow us to still access the carrier if we have the awning set up. Used a 6x8' white tarp. We don't need it to be too big, we just want the area of the sliding door covered if it's raining. We chose white because if it is a cloudy day it should still let some light through. And it matches the van and makes it less ghetto-like (if possible).
Ghetto Awning!!
I found some hooks at a local fastener store The opening wasn't wide enough for the gromets so we cut them a bit Then we painted them black so they wouldn't stand out too much from the carrier
I installed 4 anchor points into the bottom of the rooftop carrier. Installing into the bottom will allow us to still access the carrier if we have the awning set up. Used a 6x8' white tarp. We don't need it to be too big, we just want the area of the sliding door covered if it's raining. We chose white because if it is a cloudy day it should still let some light through. And it matches the van and makes it less ghetto-like (if possible).
Last edited by nvanadm on Sat Apr 28, 2012 8:33 pm, edited 1 time in total.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
Ghetto Awning Continued...
We bought two adjustable tent poles from CT Then we also bought some rope and tent stakes. We made two little sliding blocks to adjust the tension on the ropes. We measured the distance between the gromets and installed our anchors accordingly. Here is the test fit. And again here it is, the first (I think), Ghetto Awning. Total costs involved...
Thule 250 Rooftop carrier - $80
Extension poles - $20 ($9.99 ea)
Silicone - $4
White tarp - $7
All nuts/bolts/washers - $20
Rope - $2
Stakes - $2
Grand total of...$135
We bought the rooftop carrier before this idea come to me, so we really only spent $55 on making the awning. Much better than $400+
We bought two adjustable tent poles from CT Then we also bought some rope and tent stakes. We made two little sliding blocks to adjust the tension on the ropes. We measured the distance between the gromets and installed our anchors accordingly. Here is the test fit. And again here it is, the first (I think), Ghetto Awning. Total costs involved...
Thule 250 Rooftop carrier - $80
Extension poles - $20 ($9.99 ea)
Silicone - $4
White tarp - $7
All nuts/bolts/washers - $20
Rope - $2
Stakes - $2
Grand total of...$135
We bought the rooftop carrier before this idea come to me, so we really only spent $55 on making the awning. Much better than $400+
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
So this week I painted my rims. I started this project about 3 weeks ago with my spare. Then I went on to do the other 4 rims but I couldn't get the lug nuts to budge. So then I waited another few weeks to get an air compressor and power tools from my brother-in-law, BUT THAT DIDN'T WORK EITHER
Craig (bonsai rides) finally came to my rescue. I was over at his place helping change some fluids on his Delica, and he had a breaker bar that FINALLY worked.
I had never taken my spare down before, this is what it looked like. Probably didn't even have to paint it Here it is cleaned up. I primed them first. Then painted. Painted the hubs too. Here is what I used. Done. Got a little overspray on the tires, but I'm sure it will eventually wear off.
Craig (bonsai rides) finally came to my rescue. I was over at his place helping change some fluids on his Delica, and he had a breaker bar that FINALLY worked.
I had never taken my spare down before, this is what it looked like. Probably didn't even have to paint it Here it is cleaned up. I primed them first. Then painted. Painted the hubs too. Here is what I used. Done. Got a little overspray on the tires, but I'm sure it will eventually wear off.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
This weekend I thought I would attempt the "Captain Chair Removal Mod" on my L300. I got the idea from Artacoma (http://www.delica.ca/forum/l400-captain ... 13005.html) who got the idea from RichD. Not sure if anyone has done it on a L300 yet. Turned out great! We wanted to sacrifice a little sleeping space for some more "living" space.
I removed the captain chairs with tracks attached. I then removed the seat from the tracks. Measured what I needed to notch out. The smallest I could go was 10 3/4". Then started cutting. I let my father in law do the first one. Re-installed the tracks. Finished...just needed to drop the seats in. I didn't get a chance to cut wood blocks to fit into the notch but I will do that shortly.
I removed the captain chairs with tracks attached. I then removed the seat from the tracks. Measured what I needed to notch out. The smallest I could go was 10 3/4". Then started cutting. I let my father in law do the first one. Re-installed the tracks. Finished...just needed to drop the seats in. I didn't get a chance to cut wood blocks to fit into the notch but I will do that shortly.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
The reason we did the "Captain Chair Removal Mod" was to free up some more "living" space. Our bed used to take up pretty much the whole van. We had maybe 12" between the foot of our bed and the engine hump.
This is what our bed set up used to look like. Yes, it was very comfortable for sleeping, but it felt really crowed when trying to do anything else. Especially get dressed. Now that we can easily take our captains chairs out we can make our bed a little smaller and free up some more space.
We also found these really cool Rubbermaid bins at Home Depot in the States. They have an access door on the front so we won't have to move them at all to get into them. They will also support the foot of the bed (not much weight). We think we will probably use one for dry food storage and one for dirty laundry. We're not too sure yet.
We will probably pull the bins a little more forward. We haven't decided on our new bed size yet. Pictures are pretty bare. I didn't have time to put the mattress out and get it all set up. This was just a quick test run.
This is what our bed set up used to look like. Yes, it was very comfortable for sleeping, but it felt really crowed when trying to do anything else. Especially get dressed. Now that we can easily take our captains chairs out we can make our bed a little smaller and free up some more space.
We also found these really cool Rubbermaid bins at Home Depot in the States. They have an access door on the front so we won't have to move them at all to get into them. They will also support the foot of the bed (not much weight). We think we will probably use one for dry food storage and one for dirty laundry. We're not too sure yet.
We will probably pull the bins a little more forward. We haven't decided on our new bed size yet. Pictures are pretty bare. I didn't have time to put the mattress out and get it all set up. This was just a quick test run.
- macro
- Posts: 646
- Joined: Fri Sep 23, 2011 4:37 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L400 "The Invader"
- Location: Toronto, ON
Re: nvanadm's Derelictica
Looks great! I feel ya about the bed space. I use an air bed and when everything is all set up you can't really do anything back there. Getting dressed is like trying to do yoga in a cupboard.
-Mat
http://www.expeditionportal.com/forum/t ... ost1813771
@delicacanada on Instagram
http://instagram.com/delicacanada/
http://www.expeditionportal.com/forum/t ... ost1813771
@delicacanada on Instagram
http://instagram.com/delicacanada/
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
We were able to get one more camping trip in before winter. This is what our new set up looks like now. We have so much more room now.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
Replaced the front brake pads and rear brake shoes. Thanks to Craig (bonsai rides) for giving me a hand.
Before installing the new shoes, make sure you screw the "fork" on a bit (big circle...not sure what's it's called). It makes adjusting the shoes easier. Be sure to adjust the shoes (small circle) so that you can barely get the drum on. This will put the shoes close to the drum therefore needing less pressure on the brake pedal to stop. If you're really in a pickle trying to get the drums off...like we were, we discovered that the bolt from the front door fits PERFECT! And don't forget to add some anti-seize so next time you need to remove the drums it hopefully won't be so bad.
Before installing the new shoes, make sure you screw the "fork" on a bit (big circle...not sure what's it's called). It makes adjusting the shoes easier. Be sure to adjust the shoes (small circle) so that you can barely get the drum on. This will put the shoes close to the drum therefore needing less pressure on the brake pedal to stop. If you're really in a pickle trying to get the drums off...like we were, we discovered that the bolt from the front door fits PERFECT! And don't forget to add some anti-seize so next time you need to remove the drums it hopefully won't be so bad.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
outdated
Last edited by nvanadm on Wed Jan 21, 2015 10:00 am, edited 1 time in total.
- nvanadm
- Posts: 439
- Joined: Sun Nov 09, 2008 10:48 am
- Vehicle: 1993 L300 Super Exceed
- Location: Canada
Re: nvanadm's Derelictica
Finally replaced my 5 year old Geolanders for a set of Duratrac's
Out with the old... In with the new... And a 5th Duratrac just incase (actually I will do a 5 tire rotation every 10-15k to keep them worn evenly)
Out with the old... In with the new... And a 5th Duratrac just incase (actually I will do a 5 tire rotation every 10-15k to keep them worn evenly)