Restoration of my delica

Driving a shiny 91 Delica Super Exceed? This is the section to show and tell!
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Restoration of my delica

Post by FalcoColumbarius »

Good idea. Maybe do a little cleaning while you are at it... smiles.
How long do you anticipate it will take you to change all the seals and belts?

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
tiitus
Posts: 41
Joined: Fri Dec 31, 2010 9:56 pm
Vehicle: Delica L300
Location: Poytya, Finland

Re: Restoration of my delica

Post by tiitus »

FalcoColumbarius wrote:Good idea. Maybe do a little cleaning while you are at it... smiles.
How long do you anticipate it will take you to change all the seals and belts?

Falco.
What I have done these in pajero it takes about 3h, delicas it take a little more
time, seats etc.

I try first time now a payen seals. Seller say "Those are very good", but we will see. :-)
User avatar
tiitus
Posts: 41
Joined: Fri Dec 31, 2010 9:56 pm
Vehicle: Delica L300
Location: Poytya, Finland

Re: Restoration of my delica

Post by tiitus »

FalcoColumbarius wrote:Maybe do a little cleaning while you are at it... smiles.

Falco.
It's clean enough? :-D

Image
User avatar
tiitus
Posts: 41
Joined: Fri Dec 31, 2010 9:56 pm
Vehicle: Delica L300
Location: Poytya, Finland

Re: Restoration of my delica

Post by tiitus »

Friend and I make some job to done, roof-rack is now on.
It's too high, but not a long time.

Image
User avatar
tiitus
Posts: 41
Joined: Fri Dec 31, 2010 9:56 pm
Vehicle: Delica L300
Location: Poytya, Finland

Re: Restoration of my delica

Post by tiitus »

And we make a short trip to woods, couple pics there:

Image

Image
User avatar
L300Foca
Posts: 98
Joined: Fri Oct 08, 2010 2:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitshubishi L300 2.5 TD GLX
Location: Foca, Bosnia and Herzegovina

Re: Restoration of my delica

Post by L300Foca »

tiitus wrote:I think this pic is not seen here yet.

Image

Nothing much to do but driving my deli, if next week is warmer outside then
I promise to do something to car. :-)
This one is not seen too :)
Image
FollowMe
User avatar
L300Foca
Posts: 98
Joined: Fri Oct 08, 2010 2:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitshubishi L300 2.5 TD GLX
Location: Foca, Bosnia and Herzegovina

Re: Restoration of my delica

Post by L300Foca »

tiitus wrote:I but here some story, when I try to fix my car.

First, there was a some engine warm up problem, so I change
thermostat, piece of cake.
Which thermostat opening temperature (C) is fabric ? Please
FollowMe
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Restoration of my delica

Post by FalcoColumbarius »

4D56 Thermostat:

Valve opening temperature of thermostat in Centigrade: 82 + 1.5

Full-opening temperature of thermostat in Centigrade: 95

Valve lift mm: 8.5 or more.

Check this out: L-300 A/C & Cooling systems

Falco.

P.S.: Not sure what you mean by "fabric" in this instance.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
L300Foca
Posts: 98
Joined: Fri Oct 08, 2010 2:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitshubishi L300 2.5 TD GLX
Location: Foca, Bosnia and Herzegovina

Re: Restoration of my delica

Post by L300Foca »

FalcoColumbarius wrote:4D56 Thermostat:

Valve opening temperature of thermostat in Centigrade: 82 + 1.5

Full-opening temperature of thermostat in Centigrade: 95

Valve lift mm: 8.5 or more.

Check this out: L-300 A/C & Cooling systems

Falco.

P.S.: Not sure what you mean by "fabric" in this instance.
TNX!!

Fabric = New engine from factory

Why I ask this? Becouse, in Bosnia i can find couple thermostats whith diferent opening temperatures.
So, 82 writed on the bootom of thermostat is that one? Original?
FollowMe
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Restoration of my delica

Post by FalcoColumbarius »

L300Foca wrote:Why I ask this? Becouse, in Bosnia i can find couple thermostats whith diferent opening temperatures.
So, 82 writed on the bootom of thermostat is that one? Original?
Read the manual I posted a link to. It speaks of different thermostats for the different engines that have powered the L300. The engine you are writing about is the 4D56T?

Tiitus, nice articulation on your wagon's suspension.

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
L300Foca
Posts: 98
Joined: Fri Oct 08, 2010 2:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitshubishi L300 2.5 TD GLX
Location: Foca, Bosnia and Herzegovina

Re: Restoration of my delica

Post by L300Foca »

FalcoColumbarius wrote:
L300Foca wrote:Why I ask this? Becouse, in Bosnia i can find couple thermostats whith diferent opening temperatures.
So, 82 writed on the bootom of thermostat is that one? Original?
Read the manual I posted a link to. It speaks of different thermostats for the different engines that have powered the L300. The engine you are writing about is the 4D56T?

Falco.
Its 4D56T engine (82 deg), and I found that in manual, tnx!
FollowMe
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Restoration of my delica

Post by jessef »

tiitus wrote:It's clean enough? :-D

Image
Very 8-)
User avatar
tiitus
Posts: 41
Joined: Fri Dec 31, 2010 9:56 pm
Vehicle: Delica L300
Location: Poytya, Finland

Re: Restoration of my delica

Post by tiitus »

L300Foca wrote:
Which thermostat opening temperature (C) is fabric ? Please
Like I write another toopic, I use 88c thermostat, when is -25 outside car is not
getting enough warm inside if you use coulder thermostat.
Also my pajero (same engine) manual give this:
!WRONG!Thermostat valve opening temperature C°(F°) 88(190)!WRONG!
Here is right one: http://www.mitsubishi4wd.com/delica/muut/thermostat.jpg
Last edited by tiitus on Fri Oct 07, 2011 1:38 am, edited 2 times in total.
User avatar
tiitus
Posts: 41
Joined: Fri Dec 31, 2010 9:56 pm
Vehicle: Delica L300
Location: Poytya, Finland

Re: Restoration of my delica

Post by tiitus »

FalcoColumbarius wrote:
Tiitus, nice articulation on your wagon's suspension.

Falco.
Thank you. :-)
I think it's need some act, like a get it 5cm higher.
Front is easy, but back leafs need more job.
User avatar
L300Foca
Posts: 98
Joined: Fri Oct 08, 2010 2:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitshubishi L300 2.5 TD GLX
Location: Foca, Bosnia and Herzegovina

Re: Restoration of my delica

Post by L300Foca »

tiitus wrote:
L300Foca wrote:
Which thermostat opening temperature (C) is fabric ? Please
Like I write another toopic, I use 88c thermostat, when is -25 outside car is not
getting enough warm inside if you use coulder thermostat.
Also my pajero (same engine) manual give this:
Thermostat valve opening temperature C°(F°) 88(190)
Most of time i drive on summer, so 82 works 4 me :)
FollowMe
Post Reply

Return to “Member Rides”