Help with new sliding door roller

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
hotplate
Posts: 55
Joined: Sun May 15, 2011 3:32 pm
Vehicle: Dodge Ram
Location: Hamilton, ON

Help with new sliding door roller

Post by hotplate »

Hey guys, I ordered a new roller for the sliding door. It came attached to the arm but my door is modified and I need to get this roller off the arm it came with. Does anyone know how to get the pin out that holds them together?
Image
Top
User avatar
Big-Bird
Posts: 1218
Joined: Thu Dec 08, 2011 5:57 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=20974
Vehicle: 96 PE8W Spacegear
Location: Calgary

Re: Help with new sliding door roller

Post by Big-Bird »

Unless there is a spring clip on the other end of the bog pin you will have to grind or zip-cut one of the heads of the pin and then push the pin out.
Yeah I joined the Dark Side because the medical plan is top shelf!

Image
Top
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: Help with new sliding door roller

Post by macro »

A BFHammer?
Top
Post Reply

Return to “L300 Technical”