power sunshades (crystal-lite roof)

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
Green1
Posts: 3257
Joined: Wed Jul 19, 2006 9:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 L400 Royal Exceed PF8W
Location: Calgary Alberta Canada
Contact:

power sunshades (crystal-lite roof)

Post by Green1 »

As the general consensus appears to be that I do not know what I'm talking about, and cause more harm than good, I am removing this post so that others are not tricked in to following my ill-advised instructions.
Last edited by Green1 on Sun Jun 06, 2010 9:29 pm, edited 1 time in total.
User avatar
BCDelica
Posts: 1808
Joined: Tue Jul 18, 2006 4:12 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=10008
Vehicle: WVO Powered Tuk Tuk
Location: Central Van Isle
Location: Somewhere with plenty of sun

Post by BCDelica »

Well thank you for being what appears to be the first in Canada to tackle this problem, breadman referred to it as the holy grail of Deli fix's. And yes things sometimes go wrong with do it yourself projects, just yesterday evening I decided to tackle the leaky floor seam on my passenger side. Every thing was going quite smooth, I have done this to a total seven Delica front corners and felt pretty confident. Well I was little forceful on the top screw under the window molding and jammed the phillips bit into the inside corner, cracking my windshield a bit in the bottom corner. Was pretty chocked, blamed it on the new strength that's coming back into my right arm since my neck surgery.

Kev - you only hurt the ones you love, right? :oops:
Image Call me BCDelica-less
Green1
Posts: 3257
Joined: Wed Jul 19, 2006 9:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 L400 Royal Exceed PF8W
Location: Calgary Alberta Canada
Contact:

Post by Green1 »

As the general consensus appears to be that I do not know what I'm talking about, and cause more harm than good, I am removing this post so that others are not tricked in to following my ill-advised instructions.
Post Reply

Return to “L300 Technical”