Flexible oil pan heater size

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
pham
Posts: 38
Joined: Wed Jan 16, 2008 7:39 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 Delica L400 Exceed SWB
Location: Coquitlam, BC Canada

Flexible oil pan heater size

Post by pham »

Can anyone tell me the size of "Flexible oil pan heater" I can attach to the bottom side of the 4M40 oil pan.
You will save me the time to pull of my plates :-)
Regards,
Paul
403delica
Posts: 270
Joined: Fri Aug 10, 2012 8:55 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: LWB L400
Location: Calgary

Re: Flexible oil pan heater size

Post by 403delica »

i bought one for 12 qts and attached it to the front not the bottom... if you go on the bottom it will be a very small heater. Yes heat rises but the capacity of the oil will still be in contact...my size was about 3'' by 4.5'' i would say. They are rated in ability to heat a certain amount of oil. :-D
User avatar
pham
Posts: 38
Joined: Wed Jan 16, 2008 7:39 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 Delica L400 Exceed SWB
Location: Coquitlam, BC Canada

Re: Flexible oil pan heater size

Post by pham »

Thanks for the info, do you recall the make and model you purchased?
Regards,
Paul
403delica
Posts: 270
Joined: Fri Aug 10, 2012 8:55 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: LWB L400
Location: Calgary

Flexible oil pan heater size

Post by 403delica »

Model 512 from auto value... I think it's Canadian heaters... There essintaly all the same I have an account from auto value... Just under 100$


Evan

Sent from my iPhone using Tapatalk
User avatar
pham
Posts: 38
Joined: Wed Jan 16, 2008 7:39 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 Delica L400 Exceed SWB
Location: Coquitlam, BC Canada

Re: Flexible oil pan heater size

Post by pham »

Thanks for the info 8-)
403delica
Posts: 270
Joined: Fri Aug 10, 2012 8:55 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: LWB L400
Location: Calgary

Flexible oil pan heater size

Post by 403delica »

No problem
Hope it helps



Evan

Sent from my iPhone using Tapatalk
Zeroduty
Posts: 17
Joined: Wed Nov 09, 2011 1:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: mitsubishi pajero
Location: manitoba

Re: Flexible oil pan heater size

Post by Zeroduty »

I am curious why you would bother with a pan heater, when the same thing can be accomplished by using a 0-30 or 40 weight oil. The 0 - 40 oil lets the motors crank over pretty much like summer time. The faster a diesel will crank over, the easier they start.
403delica
Posts: 270
Joined: Fri Aug 10, 2012 8:55 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: LWB L400
Location: Calgary

Re: Flexible oil pan heater size

Post by 403delica »

personal preference.... a 0 weight oil in my opinion is to light for this particular use. Warm oil has beneficial effects on many different oil activated componentry in the engine and has a great capacity to transfer heat to a frozen engine.

The oil pan heater helps starting, but it has many other benefits aside from that. :-D
Zeroduty
Posts: 17
Joined: Wed Nov 09, 2011 1:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: mitsubishi pajero
Location: manitoba

Re: Flexible oil pan heater size

Post by Zeroduty »

The 0 weight oils are designed for commercial and industrial uses. I have run them into the summer with no adverse affects. In fact my neighbour runs it year around in 5.9 cummins in his tractor. The real benefit is when you have to leave a vehicle parked without access to hydro. At -20 or 30 it can mean the difference of driving home or calling for a ride.

Vern
403delica
Posts: 270
Joined: Fri Aug 10, 2012 8:55 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: LWB L400
Location: Calgary

Re: Flexible oil pan heater size

Post by 403delica »

Oil pan heaters are also designed for industrial use... wolverine heaters. O weight oil lacks what is called laminar flow resistance... aka stick to parts ability. Yes it flows and all that pretty stuff but the noticeable difference when it comes to engine protection between a 5 weight and a 0 weight is what matters. Like i said before my vehicle starts fine plugged in or not, with a pan heater or not. It will be better on the engine with warm/hot oil and cause less internal wear on parts. Our diesel (4M40) is lucky in the fact that it has the ability to take other types of oil aka 5 weight, 15 weight etc. This is not the case in many newer styles because of injection setups, there designed to take a specific weight of oil based on "stickiness"

If 0 weight works for yah go nuts! Ill stick with 5 :-D

And don't quote me on this its been a while since i was in school :o
Post Reply

Return to “L400 Technical”