Timing chain replacement, I need how-to for dummies!

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Timing chain replacement, I need how-to for dummies!

Post by macro »

I was reading the engine manual off this site, and looked through the manual I have, without finding any info that puts it into simpletons language for me.

Has anyone seen any threads on how to change the timing chain on a 4M40? I want to find out also if it's a ME job or a pay-someone-to-do-it-while-I-get-my-oil-changed-at-the-same-time, job. I turned over to 200k awhile ago and want to change the timing chain before winter hits.
Feds
Posts: 314
Joined: Fri Jan 07, 2011 11:16 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1996 Royal Exceed (in transit)
Location: Sunny Fenwick

Re: Timing chain replacement, I need how-to for dummies!

Post by Feds »

Is it chuffing? If it's not chuffing, I wouldn't worry about it. You can also do a more scientific test:

http://www.mdocuk.co.uk/forums/viewtopi ... c&start=15

As for DIY vs. Can't Someone Else Do It: how is your ability to get this many things right all at once?

http://img716.imageshack.us/img716/5407/2002ho.jpg
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: Timing chain replacement, I need how-to for dummies!

Post by macro »

It's not chuffing BUT I would rather replace it now and have 200,000 more km of at ease mindedishness.

That picture is, ahhhh, eye opening. I could do it, if I had a proper garage. I'm thinking that may be better suited to a mechanic. Damn.
davidwwc
Posts: 180
Joined: Thu Oct 14, 2010 4:30 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994L400 Delica
Location: Burnaby Bc Canada

Re: Timing chain replacement, I need how-to for dummies!

Post by davidwwc »

Maco,

There are some posts if you search the club from UK.

The link below is
" Strangerover's chain Gang"


http://www.mdocuk.co.uk/forums/viewtopic.php?t=23805

DC
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: Timing chain replacement, I need how-to for dummies!

Post by macro »

Thanks, I have read through most of what I can find on the other forums. What I have discovered is that since my van isn't making any noise, I'm probably just going to replace the chain. I can't afford to pull the whole front of the motor off. If it was making any chuffing sound at all then I would replace everything, but at this point it's just peace of mind for me.

What I still can't seem to find is a detailed how-to on changing these. The UK guys seem to have all bought a kit from a fella with detailed instructions in it, but those don't seem to be on the site. I know they use a split link to pull the chain through the motor by hand cranking it, I do have the manual with all the timing info as well. I like to read through everything and have all the steps in my head before I tackle something like this.
Post Reply

Return to “L400 Technical”