Page 2 of 2
Re: 26mm Sandwich Adapter is here - along with other bits.
Posted: Thu Mar 07, 2013 6:55 pm
by macro
Ahhh that makes sense, time to add that to the 'to do' list!
Re: 26mm Sandwich Adapter is here - along with other bits.
Posted: Tue Apr 29, 2014 11:01 am
by psilosin
Any finished pics to see where you relocated the oil filters to?
Re: 26mm Sandwich Adapter is here - along with other bits.
Posted: Tue Apr 29, 2014 2:48 pm
by Mr. Flibble
psilosin wrote:Any finished pics to see where you relocated the oil filters to?
NO! I still have yet to do it. Currently there is a car and a backhoe occupying the spot with the lift so I can't get to it until the lift is clear.
It is the next mod on my list, so I hope to get it finished this summer. I do need to source some steel braided oil line, but of course, first I must figure out where I will locate the remote filters. I have an idea, but I have not yet bought a tap and drill set to mount it.
As an aside, I also plan to remote mount some filters for my transmission. My plan is to remove the standard mesh transmission filter and use a dual oil filter setup to filter my transmission fluid as well.
Re: 26mm Sandwich Adapter is here - along with other bits.
Posted: Sun Jul 06, 2025 5:37 pm
by Mr. Flibble
So, here I am in 2025 getting ready to install the Jackmaster adapter and bypass.
Due to relocating to the US, I could not drive the van, and until last year, I was finally able to get it here and get it registered. So I have a very mileage L400 about to get this mod.