No Compressor Condensor Fan Operation
Posted: Tue Jun 20, 2017 1:37 am
Hello all,
I am finishing up a Delica for a customer and I ran into a bit of a snag yesterday while finishing up the R134a conversion. After I charged the system, I started the truck only to find no compressor or condensor fans working. I checked all of the fuses behind the glove box and discovered that no power was going into the White/red 15A fuse on the far right of the cooling box. This led me to a two hour google search and wiring schematic pour over until finally ending up back here to double check the L300 service manual. Low and behold, there is a fusible link near the battery JUST for a/c components. It's a white fusible link and the harness connector is to the left of the battery. That was loose. So I hope this saves someone some trouble.
K
I am finishing up a Delica for a customer and I ran into a bit of a snag yesterday while finishing up the R134a conversion. After I charged the system, I started the truck only to find no compressor or condensor fans working. I checked all of the fuses behind the glove box and discovered that no power was going into the White/red 15A fuse on the far right of the cooling box. This led me to a two hour google search and wiring schematic pour over until finally ending up back here to double check the L300 service manual. Low and behold, there is a fusible link near the battery JUST for a/c components. It's a white fusible link and the harness connector is to the left of the battery. That was loose. So I hope this saves someone some trouble.
K