Delica Canada | Mitsubishi Van Club

Hey Shawnzy, Let us know how the engine runs now that you have done this ~ see if it affects cooling in some way. If you don't mind, I would be interested in a follow-up. It's through these experiences that we learn. Cheers! Falco. Well after seeing how clogged the rear core was i decided not to st...

One thing I might add to Loki's suggestion is to remind you to clamp the hoses before you disconnect anything. When I replaced my rear fan set up (I landed on something whilst traversing the snow laden uneven paths of adversity up the Squamish Valley) ~ I saw it as being straight forward, which it ...

should i flush from the T to the rear or back flush from the rear to the T try to determine the direction of flow, then flush in the opposite direction, if that doesn't work, go the other way :) you can likely figure out the direction of flow by following the heat from the engine, an infer-red temp...

I would follow those hoses until I found: A/ where they are blocked or disconnected; B/ check my rad/water pump... For that matter it could be something like the rad cap have a crack in the seal thereby the cooling system not pressurising. Here is the Cooling System Manual from next door in "D...

I would follow those hoses until I found: A/ where they are blocked or disconnected; B/ check my rad/water pump... For that matter it could be something like the rad cap have a crack in the seal thereby the cooling system not pressurising. Here is the Cooling System Manual from next door in "D...

on the left side of the engine near the rear you should see a T junction where the the front heater hose and rear heater hose connect to the block. Start tracing backwards towards the rear heater core. I had the same thing when I first got my van...turned out to be a clogged line. I replace all rub...

I would follow those hoses until I found: A/ where they are blocked or disconnected; B/ check my rad/water pump... For that matter it could be something like the rad cap have a crack in the seal thereby the cooling system not pressurising. Here is the Cooling System Manual from next down in "D...

i have mitsubishi petro van/wagon very close to the delica without the bells and whistles but i have no rear heat i know about the settings floor for heat top for air, i have used the heat in the past ,with all the controls in the proper position and heat flowing up front still none to the rear, i h...

Hi Shawnzy, welcome to the group. You have a very rare van, the USA import model. Just to let you know that our expert in that van is Glen at CC Autos, who has been replying to your posts -- so you are in good hands with his advice and knowledge. Keep in touch with the group, send photos, everyone ...

i have the us van

ccautos wrote:Do you have the U.S. market van or JDM import ??

but would love to find a front bull bar

shawnzy wrote:thanks for the info i went with a new one and found new problem ,condenser fan not coming on

ccautos wrote:I have a gas delica here for parts and can ship anywhere. Please call 250-954-2157 or email ccautos@telus.net. Thanks, Glen

thanks for the info i went with a new one and found new problem ,condenser fan not coming on

ccautos wrote:I have a gas delica here for parts and can ship anywhere. Please call 250-954-2157 or email ccautos@telus.net. Thanks, Glen

need to find a compressor for a 1990 van 4cyl with front and rear air, live in georgia and parts for this van do not exist