- P6160252 (800x600).jpg (266.19 KiB) Viewed 5668 times
- P6160254 (800x600).jpg (233.91 KiB) Viewed 5668 times
l300 bullbar swap
Moderator: BCDelica
-
gezzza
- Posts: 48
- Joined: Sat Aug 27, 2011 8:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 exceed
- Location: gold coast australia
l300 bullbar swap
Any body looking to upgrade the old possum bar i found a 60 series landcruiser bar will fit nicely. Protrudes out the sides a little but sits at a nice height on the standard bar mounts. .Not mounted yet but i took my front bumper off and will be getting a few more brackets made which will attatch to the chassis rail and the bottom of the bar. It all lines up quite nicely with minimal work involved.
-
Firesong
- Posts: 1363
- Joined: Tue Feb 03, 2009 9:03 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1998 L400 Delica Chamonix
- Location: Saskatoon
- Location: Saskatoon, SK. Canada
Re: l300 bullbar swap
I like it,
Is it an aluminum bbar or steel?
FS
Is it an aluminum bbar or steel?
FS
-
gezzza
- Posts: 48
- Joined: Sat Aug 27, 2011 8:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 exceed
- Location: gold coast australia
Re: l300 bullbar swap
yo fs it is a alloy bar that was painted black but i have paint strippered it since then. Started working on it today grinding out the chassis rail holes. Will put some pictures up in a cupla days.
-
mararmeisto
- Posts: 3276
- Joined: Wed Sep 19, 2007 10:00 am
- Vehicle: 2018 Ram EcoDiesel
- Location: Dartmouth, NS
Re: l300 bullbar swap
That fits surprisingly well, with the lights lining up and everything. Good find!
JPL
I still miss my '94 Pajero!
I still miss my '94 Pajero!
-
gezzza
- Posts: 48
- Joined: Sat Aug 27, 2011 8:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 exceed
- Location: gold coast australia
Re: l300 bullbar swap
Its been done for a month now so heres some pics
- P7060267 (570x428).jpg (189.83 KiB) Viewed 5407 times
- P7060272 (570x428).jpg (195.98 KiB) Viewed 5407 times
- P7060272 (570x428).jpg (195.98 KiB) Viewed 5407 times
- P6220258 (570x428).jpg (132.97 KiB) Viewed 5407 times
- P6220259 (570x428).jpg (163.73 KiB) Viewed 5407 times
- Attachments
-
- heres my mates aussie l300 starwagon 1984 with commodore 3.8l v6 and hydrogen setup.
- P6220260 (570x428).jpg (163.69 KiB) Viewed 5407 times
-
- EXTENDED the chassis rails with 5mm rhs steel
- P6220257 (570x428).jpg (206.19 KiB) Viewed 5407 times
Re: l300 bullbar swap
I'm interested in your dual rear wheel setup. Do you have a standard L300 rear end?
-
gezzza
- Posts: 48
- Joined: Sat Aug 27, 2011 8:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 exceed
- Location: gold coast australia
Re: l300 bullbar swap
Sorry mate that is my spare tyre sitting there because its to big to go back underneath.Now i gotta kart it around in the back.
-
WS Skoo B
- Posts: 12
- Joined: Sat Dec 15, 2012 10:16 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1989 Delica L300
- Location: West Seattle
Re: l300 bullbar swap
Hi, this looks like an old post but would really liek to get this front bar on my Delica, is there a way I could order one like this or any website that has them? Or any vehicle year and make to find one on?
Also what fabrications will need to be done to get it on? or will it just bolt up?
thank you
Also what fabrications will need to be done to get it on? or will it just bolt up?
thank you
-
josh
- Posts: 868
- Joined: Mon Jul 24, 2006 8:44 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 poptop gasser
- Location: Vancouver, bC
- Location: Vancouver, BC
Re: l300 bullbar swap
The very first sentence in this thread answers your question...
Josh.
In fact all of your questions are answered in this thread. Pictures included.gezzza wrote:Any body looking to upgrade the old possum bar i found a 60 series landcruiser bar will fit nicely.
Josh.