I have searched everywhere, and bought the wrong size.....what is the size of grease nipple do I need for the lower ball joint?? Tried 1/8 and no go, theres lots of talk about it but no actual size.
Trevor
Help with grease nipples
-
trecar
- Posts: 53
- Joined: Fri Sep 03, 2010 9:42 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 96 Delica Exceed
- Location: Cochrane, AB
- Location: Cochrane Alberta
-
thelazygreenfox
- Posts: 904
- Joined: Tue Jun 08, 2010 7:21 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 99 white Hi roof gas Chamonix
- Location: Coquitlam B.C.
- Location: coquitlam canada
Re: Help with grease nipples
Trevor
If you're looking for a specific size, remove it and buy more at NAPA, Lordco or..... It's metric and the thread need to be sized correctly.
TLGF
If you're looking for a specific size, remove it and buy more at NAPA, Lordco or..... It's metric and the thread need to be sized correctly.
TLGF
Wear your mask, it keeps others from seeing the parsley in your teeth
-
trecar
- Posts: 53
- Joined: Fri Sep 03, 2010 9:42 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 96 Delica Exceed
- Location: Cochrane, AB
- Location: Cochrane Alberta
Re: Help with grease nipples
Ok thx, there is just the 10 mm cap there, should be able to size it with that.