What did you do TO your Delica today?

lettereleven · Post by **lettereleven** » Sat Feb 16, 2013 5:37 pm

I managed to upack the 2 axles that I bought earlier this week from inside the van. They used a forklift to load them so it was a bit epic to unload solo. Nonetheless, a great learning experience.

CREGAN · Post by **CREGAN** » Mon Feb 18, 2013 4:46 pm

Finished performing surgery on my broken parking pole. I think it was a success. Minimal swearing. I got to use plasti dip for the first time today. Used it to seal up the bottom of the pole (water kept filling it and corroding the screws I have holding it together). Very cool stuff. I would have to say I like the spray better for ease but the dip will come in handy on the feet for my roof rack this summer. I also bought a can of white which I am thinking of using on the van hood for a rock guard/bra. Won't be an exact match colour wise but if it helps stop some of the chipping I will be OK with it.

Craig

Feds · Post by **Feds** » Mon Feb 18, 2013 5:27 pm

Had a Deli-heavy weekend, despite not being 100%, and going to bed at 8 on Friday and Sunday nights.

Finished welding up the hitch, though I neglected to take pictures. I DID however take some pics of the snorkle install. Having done Bonsai's a couple of weeks ago, it went pretty smooth.

Started with the template we modified, and drilled right through the intake in the fender:

Next I did the holes for the mount bolts, then took the fender right off. This made it WAY easier to get the snorkle onto the fender, and let me paint/rustproof over everything.

Installation is the opposite of removal. I got called in to dinner at this point (it IS family day after all), and am on my way back out to button it up.

Mr. Flibble · Post by **Mr. Flibble** » Sun Feb 24, 2013 12:17 pm

CREGAN wrote:Made myself a cabin air filter. Remember reading here a while ago about them being non existant and got tired of the used dryer sheet I had been using always falling out when I popped the hood so I came up with a little invention. I purchased some new charcoal prefilters for our bedroom air purifier from London Drugs and realized they would work great to replace said dryer sheet. $15 (enough in the box to probably make 4 or 5) and 4 of my wifes bobbie pins to hold it in place. Works well.

Optimized-IMG_9207.JPG
Craig

I was hunting all over the forum for this post - finally found it! :)

CREGAN · Post by **CREGAN** » Sun Feb 24, 2013 2:09 pm

Mr. Flibble wrote:
CREGAN wrote:Made myself a cabin air filter. Remember reading here a while ago about them being non existant and got tired of the used dryer sheet I had been using always falling out when I popped the hood so I came up with a little invention. I purchased some new charcoal prefilters for our bedroom air purifier from London Drugs and realized they would work great to replace said dryer sheet. $15 (enough in the box to probably make 4 or 5) and 4 of my wifes bobbie pins to hold it in place. Works well.

Optimized-IMG_9207.JPG
Craig
I was hunting all over the forum for this post - finally found it! :)

Just went and bought another pack of replacements at Crappy Tire. $20, makes about 4-5 filters.

Craig

Nukes25 · Post by **Nukes25** » Mon Feb 25, 2013 9:07 pm

got my K&N in the mail today, so installed it, and I got my replacement rear brake cylinders, shoes, and valve cover set, so will do these parts on my weekend, hoping my EGR blockoff kit comes in by then

Post by **Big-Bird** » Wed Mar 06, 2013 5:11 pm

Got myself a cool Sumo Co-Pilot! Absolutely hilarious! I need to get a second one and hav'em face eachother on my dash.

LINK http://www.facebook.com/photo.php?fbid= ... =1&theater

Feds · Post by **Feds** » Thu Mar 07, 2013 9:54 pm

I went out to the garage with the goal of installing my 4-in-1 EGT, but instead got distracted by my quest to "unRoyal" my exceed.

claude · Post by **claude** » Sat Mar 16, 2013 7:41 pm

Got some new cool DRL and bypass turn signal module that was fried up to a new switch. Finely I have turn signal working all that with the help of Jay and Christine .
Thanks so much Guys !!!

Shaun Van Ramen · Post by **Shaun Van Ramen** » Mon Mar 25, 2013 6:01 pm

Made my first armrest - see the thread...
http://www.delica.ca/forum/doorside-arm ... ml#p112498

lettereleven · Post by **lettereleven** » Mon Mar 25, 2013 9:28 pm

The other day I replaced the front calipers, rotors and pads.
Not bad for a noob.

konadog · Post by **konadog** » Wed Mar 27, 2013 6:01 pm

First, I busted my passenger side mirror while backing through a gate - Boo

Then I called around and found one at CCA. The LAST one at CCA...

So I can back my trailer up safely again. Pretty grim without that nice curved mirror out there.
Hope I don't break this one...

LeeHammy · Post by **LeeHammy** » Wed Mar 27, 2013 8:53 pm

Converted my fogs to 55w 4300k HID's
My drivers to 70w 4300k HID's and my headlights to 55w 4300k HID's. (aimed correctly and not blinding)

.... you know.. for when the zombies come.

lettereleven · Post by **lettereleven** » Fri Mar 29, 2013 5:44 pm

Gave my tires a bath.

I am not that obsessive, I was prepping for painting.

: ImageUploadedByTapatalk1364604238.832120.jpg (58.45 KiB) Viewed 6412 times

Post by **FalcoColumbarius** » Fri Mar 29, 2013 5:54 pm

What kind of conditioner do you use?

Delica Canada | Mitsubishi Van Club

What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

Re: What did you do TO your Delica today?

What did you do TO your Delica today?

Re: What did you do TO your Delica today?