L300 dome light cover help....

gura119 · Post by **gura119** » Mon Jun 10, 2013 10:16 pm

Does anyone know the way to remove the cover of this dome light.....
I'm going to replace incandescent festoon bulb with a LED festoon bulb, But I cannot find the way to remove the cover. There aren't any screws outside.

Please help me guys...

Post by **nxski** » Mon Jun 10, 2013 10:19 pm

Screw driver in the side and pry.

gura119 · Post by **gura119** » Mon Jun 10, 2013 10:34 pm

nxski wrote:Screw driver in the side and pry.

Thanks for the help bro...

But will it breaks when I attempt this.....

Post by **nxski** » Mon Jun 10, 2013 10:36 pm

It shouldn't. There should be a little groove on either side. if you pry gently, it should pop off very easily.

gura119 · Post by **gura119** » Tue Jun 11, 2013 2:57 am

nxski wrote:It shouldn't. There should be a little groove on either side. if you pry gently, it should pop off very easily.

It worked,

Thank you very much bro...

Delica Canada | Mitsubishi Van Club

L300 dome light cover help....

L300 dome light cover help....

Re: L300 dome light cover help....

Re: L300 dome light cover help....

Re: L300 dome light cover help....

Re: L300 dome light cover help....