Hello,
I have a 1990 delica with the rectangular headlights. I'm looking for the bullbar, but can only find ones for the newer delicas. The old style is smaller and just has the center part of the bar as opposed to having wings on both side of it. Is the mounting points the same?
Thanks,
Bull bar question
-
- Posts: 8
- Joined: Tue Oct 01, 2013 7:22 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1990 Exceed
- Location: Vancouver
- FalcoColumbarius
- Site Admin
- Posts: 5983
- Joined: Tue Jan 22, 2008 1:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
- Vehicle: Delica; Chamonix GLX ('92 P25W)
- Location: North Van, BC, eh?
Re: Bull bar question
Good question. There's a Delica Meet coming up at the IKEA in Coquitlam on Friday the 17th of January. Why not turn up with a tape measure?
Falco.
Falco.
Sent from my smart pad, using a pen.
Seek Beauty...
Good Ship Miss Lil' Bitchi
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Seek Beauty...
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
- thedjjack
- Posts: 2025
- Joined: Wed Jan 27, 2010 12:13 am
- Member's Photo Album: ucp.php?i=164
- Vehicle: 1989 L300 HITOP!!
- Location: Port McNeill
- Location: Port McNeill
- Contact:
Re: Bull bar question
skip the tape measure and just eat meat balls at Ikea meet
New bull bar bolts on no problem (I put a new style one on my 1989).... Square headlights are the best L300 ever :)
New bull bar bolts on no problem (I put a new style one on my 1989).... Square headlights are the best L300 ever :)
- Lapprentis
- Posts: 357
- Joined: Sat Dec 28, 2013 6:02 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L300 StarWagon 1990
- Location: Quebec
Re: Bull bar question
I too have an question about Bullbar as the one on my upcoming Delica is different from the usual one. I do worry a little bit as this car wll have to pass inspection. I even wounder if it would be a good idea to take it off for the inspection and put it on once plate ? What do you think ?
Much Thanks
Lapprentis
Much Thanks
Lapprentis
- Attachments
-
- delica f-PDF.pdf
- (55.91 KiB) Downloaded 316 times