need fabrication for Sliding door extension bracket

everythingells · Post by **everythingells** » Sat Feb 22, 2014 12:39 am

does anyone have the fabrication file, PDF or documents to build this unit for an L300 (94") Sliding door extension bracket. i have the oversized fenders and am having serious problems finding this info anywhere.
thank you to anyone who can help.

Andrew (Banff Aberta)

Post by **Big-Bird** » Sat Feb 22, 2014 10:10 am

Seems this was already on our forum. You will need to find out which Delica the designs are for....L300 or L400.

http://www.delica.ca/forum/sliding-door ... -8497.html

Wobby · Post by **Wobby** » Sat Feb 22, 2014 10:38 pm

I think you will find that they are for an L300, but it appears the drawings are incomplete

Sent from my iPad using Tapatalk HD

lrp374 · Post by **lrp374** » Sun Feb 23, 2014 5:41 pm

I think I may have found the Motherlode!!! I have tried searching several ways and pieces were always missing. Jesse usually did great write ups and I think this one may have all the pieces plus installation pictures. I'm not sure why I couldn't find it before.

http://www.delica.ca/forum/wanted-slide ... 12614.html

If these are complete and someone decides to set up shop I'd be interested in a set.

Larry

everythingells · Post by **everythingells** » Mon Feb 24, 2014 12:35 pm

Thanks so much lrp374, big-bird and wobbly.
lrp374, that was a great reply!!! it really shows everything/every step well and with a diagram and photos (CHECK IT OUT EVERYONE). i have most of it done already because my van came with a half broken-down version. but its finally crapped the bed so its time to make the door slide smoothly again.
if anyone out there in delica space has made one or had one made let me know your fabricators contact and maybe i can have several made and unload them here on the site. it seems like a popular piece.

p.s. does anyone have the actual connecting piece that connects to the van? that is something i don't have

lrp374 wrote:I think I may have found the Motherlode!!! I have tried searching several ways and pieces were always missing. Jesse usually did great write ups and I think this one may have all the pieces plus installation pictures. I'm not sure why I couldn't find it before.

http://www.delica.ca/forum/wanted-slide ... 12614.html

If these are complete and someone decides to set up shop I'd be interested in a set.

Larry

from the original days. noticed the fabrication diagram and details don't include this piece. assuming you have it, but i don't. let me know and

thanks all...

Delica Canada | Mitsubishi Van Club