grease points on delica ????

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

User avatar
Mr. Flibble
Posts: 1393
Joined: Tue Nov 03, 2009 7:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 Royal Exceed
Location: Issaquah, Washington
Location: Issaquah, Washington

Re: grease points on delica ????

Post by Mr. Flibble »

Has anyone found the grease nipple size other than "metric"?

I need to order my gun online, but I don't know the size.
Canadian living in Washington USA
stever1000
Posts: 258
Joined: Fri Apr 13, 2012 5:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExceed
Location: Vancouver

Re: grease points on delica ????

Post by stever1000 »

Did you find out the size?
User avatar
Mr. Flibble
Posts: 1393
Joined: Tue Nov 03, 2009 7:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 Royal Exceed
Location: Issaquah, Washington
Location: Issaquah, Washington

Re: grease points on delica ????

Post by Mr. Flibble »

stever1000 wrote:Did you find out the size?
No, I still don't know.
Canadian living in Washington USA
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: grease points on delica ????

Post by macro »

Why do you need to know the size? Isn't there only 3 grease points on the L400? All accessible with a grease gun?
User avatar
Mr. Flibble
Posts: 1393
Joined: Tue Nov 03, 2009 7:31 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 L400 Royal Exceed
Location: Issaquah, Washington
Location: Issaquah, Washington

Re: grease points on delica ????

Post by Mr. Flibble »

macro wrote:Why do you need to know the size? Isn't there only 3 grease points on the L400? All accessible with a grease gun?
I need to know the size of grease fitting to order so I get one that fits.

There are a few more than 3, depending on a few factors:

http://www.mdocuk.co.uk/forums/viewtopi ... 8bfe9141f0
Canadian living in Washington USA
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: grease points on delica ????

Post by macro »

Ahh I see, so yours currently has the bolts? The only ones mine has are on the driveshaft.
stever1000
Posts: 258
Joined: Fri Apr 13, 2012 5:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExceed
Location: Vancouver

Re: grease points on delica ????

Post by stever1000 »

I greased mine today and I had at least 6
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

grease points on delica ????

Post by macro »

Where were the others??
stever1000
Posts: 258
Joined: Fri Apr 13, 2012 5:25 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExceed
Location: Vancouver

Re: grease points on delica ????

Post by stever1000 »

2 on the tie rod ends, at least two total (maybe 3? I can't remember) on the front and rear drive shafts, and 2 on my upper ball joints (I had to remove the grease nipple from one of my tie rod ends to use on the ball joint [removing the small bolt from the ball joints])
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: grease points on delica ????

Post by FalcoColumbarius »

macro wrote:Where were the others??
Have you guys thought about checking the shop manual? Then you will know for certain.

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
macro
Posts: 646
Joined: Fri Sep 23, 2011 4:37 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 "The Invader"
Location: Toronto, ON

Re: grease points on delica ????

Post by macro »

FalcoColumbarius wrote:
macro wrote:Where were the others??
Have you guys thought about checking the shop manual? Then you will know for certain.

Falco.
Believe it or not, yes.
Post Reply

Return to “General Discussion”