I want to cut an EGR blanking plate so I can install an EGT gauge. Does anyone have a drawing with the dimensions so I can get it cut?
What is the best material to use?
I haven't had luck buying the plates already made, so I would prefer to do it myself now
Thanks!
EGR Blanking Plate dimensions
-
stever1000
- Posts: 258
- Joined: Fri Apr 13, 2012 5:25 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 L400 SuperExceed
- Location: Vancouver
Re: EGR Blanking Plate dimensions
Rising Sun advertises them for $ 20.
-
Tojo
- Posts: 185
- Joined: Mon Oct 31, 2011 4:17 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L400 Super Exceed LWB
- Location: West Kootenays, BC
Re: EGR Blanking Plate dimensions
1993 Delica L300, SWB, LSD, Super Exceed with Crystal-Lite, mostly stock but it's got a digital EGT!!!
1995 Delica L400, LWB, Super Exceed with Crystal-lite, Airlift airbags, SS intercooler pipes, soon to be WVO
1997 Isuzu ELF 2.0Ton Crane truck, 4300cc diesel, NKR66E
1995 Delica L400, LWB, Super Exceed with Crystal-lite, Airlift airbags, SS intercooler pipes, soon to be WVO
1997 Isuzu ELF 2.0Ton Crane truck, 4300cc diesel, NKR66E
-
stever1000
- Posts: 258
- Joined: Fri Apr 13, 2012 5:25 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 L400 SuperExceed
- Location: Vancouver
Re: EGR Blanking Plate dimensions
Wow, perfect!! Thanks Tojo