Wanted L300 liftgate

Looking for a specific hard-to-find Delica part? Post your request in this section. Commercial postings can be found in "Delica Trader Parts Section".

Moderators: delicanuck, mark

Post Reply
User avatar
PolyTek
Posts: 103
Joined: Fri Sep 28, 2007 1:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P35W Exceed 5MT
Location: Lower Mainland, BC
Location: Port Coquitlam, B.C., Canada
Contact:

Wanted L300 liftgate

Post by PolyTek »

Looking for a liftgate for my L300. Thanks.
The world is my oyster; tasty, yet often full of sand.
redneck4life
Posts: 10
Joined: Tue Feb 02, 2016 7:04 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: misibishi delcia
Location: maple ridge bc

Re: Wanted L300 liftgate

Post by redneck4life »

I have a lift gate not super nice regualr hieght functaional tho
redneck4life
Posts: 10
Joined: Tue Feb 02, 2016 7:04 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: misibishi delcia
Location: maple ridge bc

Re: Wanted L300 liftgate

Post by redneck4life »

Sorry 6047859967
User avatar
PolyTek
Posts: 103
Joined: Fri Sep 28, 2007 1:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P35W Exceed 5MT
Location: Lower Mainland, BC
Location: Port Coquitlam, B.C., Canada
Contact:

Re: Wanted L300 liftgate

Post by PolyTek »

Need high roof, sorry. Are you the guy out Dewdney Trunk?
The world is my oyster; tasty, yet often full of sand.
User avatar
lrp374
Posts: 1023
Joined: Sun Nov 23, 2008 9:56 pm
Vehicle: 91 Super Exceed
Location: Kamloops

Re: Wanted L300 liftgate

Post by lrp374 »

If you've tried all the usual sources @ the coast you may want to try http://jdmparts.ca/index.php? in Armstrong. I know they have a number of high roof units in various colors.
User avatar
PolyTek
Posts: 103
Joined: Fri Sep 28, 2007 1:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P35W Exceed 5MT
Location: Lower Mainland, BC
Location: Port Coquitlam, B.C., Canada
Contact:

Re: Wanted L300 liftgate

Post by PolyTek »

Thanks, I'll check that out. Still looking...
The world is my oyster; tasty, yet often full of sand.
Post Reply

Return to “Parts Wanted (Non-Commercial)”