Hey Guys
So im picking up my L300 in 2 days over in Vancouver and bringing it back to the island finally. I am curious as this is my first delica about "leveling" the ride height of the van. When it is sitting on level ground it has somewhat of a squatted stance in the front vs the back. From everything i have been reading it seems like the torsion bar adjustment can only be done on the L400 to bring the ride height up in the front. Is this the case or could it also be done on the L300 and if so any pointers?
Cheers
Stu
L300 Front End
-
stugots1982
- Posts: 60
- Joined: Fri May 13, 2016 11:53 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 delica l300
- Location: victoria bc
-
White Mule
- Posts: 259
- Joined: Wed Jul 16, 2008 4:48 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 Delica L300
- Location: Calgary
Re: L300 Front End
Nice handle. To answer your question, the L300 has adjustable torsion bars. When I brought mine in for a wheel alignment, I asked them to level the van via the torsion so bars. That was 8 years ago. All is fine.
The White Mule
The White Mule
Thanks,
White Mule
White Mule
-
Growlerbearnz
- Posts: 2041
- Joined: Sat Jun 26, 2010 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica P25W
- Location: New Zealand
Re: L300 Front End
Mystery Machine in the UK made a great post about adjusting the L300's torsion bars, complete with pictures. I really should just steal it and put it in the FAQ here.
http://www.mdocuk.co.uk/forums/viewtopic.php?t=19608
http://www.mdocuk.co.uk/forums/viewtopic.php?t=19608
Nothing says "poor workmanship" more than wrinkles in the duct tape.