These lugs are nuts!

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
stugots1982
Posts: 60
Joined: Fri May 13, 2016 11:53 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 delica l300
Location: victoria bc

These lugs are nuts!

Post by stugots1982 »

Hey so I just noticed this morning that im missing a lug nut on the front of my Deli. Stuck at work and was wondering if anyone knows where to get some. Are they just a simple nut or is the thread some weird kind?

Cheers
Stu
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Re: These lugs are nuts!

Post by Growlerbearnz »

The thread and seat shape are M12 x 1.5, cone seat. Should be easy to find. Like this one: https://www.amazon.com/McGard-64002-Chr ... B000HNL86A

The only issue I found is that aftermarket lug nuts tend to need a smaller wrench- Mitsubishi lug nuts need a 21mm socket, the only aftermarket nuts I could find use an 18mm socket (or thereabouts). For a while there I had two lug wrenches in my van, until I finally got around to buying genuine Mitsubishi replacements.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
stugots1982
Posts: 60
Joined: Fri May 13, 2016 11:53 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 delica l300
Location: victoria bc

Re: These lugs are nuts!

Post by stugots1982 »

Awesome thanks for the info
TieMyShoe
Posts: 265
Joined: Mon Sep 09, 2013 11:14 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300
Location: Abbotsford

Re: These lugs are nuts!

Post by TieMyShoe »

Lordco, Napa, Autoparts plus, Westcan, Fortins, Canadian Tire
Post Reply

Return to “L300 Technical”