I just posted this to my native forum, I hope it can be of help to you guys too!
http://www.mdocuk.co.uk/forums/viewtopic.php?t=49512
Cheers
Dave
Complete Engine Oil Leak Guide for the L300 (4D56T)
-
Yobbo
- Posts: 17
- Joined: Wed Apr 26, 2017 6:47 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 Exceed (White)
- Location: UK (East Yorkshire)
-
Growlerbearnz
- Posts: 2041
- Joined: Sat Jun 26, 2010 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica P25W
- Location: New Zealand
Complete Engine Oil Leak Guide for the L300 (4D56T)
Nicely done! Mind if I copy-paste it into the reference library here? Just in case MDOC goes down?
...though you missed one trick. MD372348: Alloy Half-moon seal, replaces the rubber half-moon seal under the rocker cover. Use grey silicone (the stiffer, high-strength stuff, as used on the sump) when fitting the alloy halfmoon. Your rocker cover will never leak again.
...though you missed one trick. MD372348: Alloy Half-moon seal, replaces the rubber half-moon seal under the rocker cover. Use grey silicone (the stiffer, high-strength stuff, as used on the sump) when fitting the alloy halfmoon. Your rocker cover will never leak again.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
-
Yobbo
- Posts: 17
- Joined: Wed Apr 26, 2017 6:47 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 Exceed (White)
- Location: UK (East Yorkshire)
Complete Engine Oil Leak Guide for the L300 (4D56T)
Be my guest. :)Growlerbearnz wrote:Nicely done! Mind if I copy-paste it into the reference library here? Just in case MDOC goes down?
...though you missed one trick. MD372348: Alloy Half-moon seal, replaces the rubber half-moon seal under the rocker cover. Use grey silicone (the stiffer, high-strength stuff, as used on the sump) when fitting the alloy halfmoon. Your rocker cover will never leak again.
Never knew such a thing existed! Should mine go again that will be getting whacked in there, cheers!
Dave