Fresh 2” lift on an L300
What (Black) rims and tires do you buy?
....GO!
Say you just lifted your L300
-
- Posts: 6
- Joined: Thu Jun 07, 2018 2:51 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: none yet
- Location: SLC, UT, USA
- Growlerbearnz
- Posts: 2041
- Joined: Sat Jun 26, 2010 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica P25W
- Location: New Zealand
Say you just lifted your L300
Mmm Black Rock 909-B. A pity they don't come in 16" though, because my next set of tyres will be 235/85R16.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
- javabob
- Posts: 71
- Joined: Thu Feb 04, 2016 11:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 Exceed (P35W)
- Location: Minneapolis
Say you just lifted your L300
I have these:
For tires I have Goodyear Wrangler DuraTrac LT235/85R16A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
-
- Posts: 6
- Joined: Thu Jun 07, 2018 2:51 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: none yet
- Location: SLC, UT, USA
Say you just lifted your L300
Great, thanks. What’s our bolt pattern?
And your 235/85, is that with a lift?
And your 235/85, is that with a lift?
-
- Posts: 189
- Joined: Thu Oct 06, 2016 3:24 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Delica L300
- Location: Pennsylvania, USA
Say you just lifted your L300
6x5.5djxtreme wrote:Great, thanks. What’s our bolt pattern?
I would expect 235/85-16's to be a tight fit even w/ a 2" lift... no way they fit w/o one.
Steven
1991 L300
Harrisburg, PA
1991 L300
Harrisburg, PA
- Growlerbearnz
- Posts: 2041
- Joined: Sat Jun 26, 2010 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica P25W
- Location: New Zealand
Say you just lifted your L300
The centre hole is unusually large. I'm guessing you didn't notice this post in the Technical Reference Library: http://www.delica.ca/forum/viewtopic.php?f=96&t=18250
Nothing says "poor workmanship" more than wrinkles in the duct tape.
- javabob
- Posts: 71
- Joined: Thu Feb 04, 2016 11:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 Exceed (P35W)
- Location: Minneapolis
Say you just lifted your L300
No lift, but I had to remove the front steps and "modify" the front arch a bit.djxtreme wrote:And your 235/85, is that with a lift?
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
-
- Posts: 6
- Joined: Thu Jun 07, 2018 2:51 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: none yet
- Location: SLC, UT, USA
Say you just lifted your L300
so those American racing rims are 16x8? because I thought 16x8 was too wide...?
-
- Posts: 6
- Joined: Thu Jun 07, 2018 2:51 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: none yet
- Location: SLC, UT, USA
Say you just lifted your L300
I've ordered the 235/85/16 KO2's, now just need to find pretty much any black rim that'll fit...