wheel lock light

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
jcolvin
Posts: 109
Joined: Fri Jan 05, 2007 11:51 pm

wheel lock light

Post by jcolvin »

Just got my new delica (an exceed), and I'm noticing that the wheel lock light is staying on in 2wd and 4wd. There seems no way to get it to go out.

Any ideas? Could the sensor be stuck? Or have my auto hubs jammed? Any easy way to tell?

Jonathan Colvin
Galiano Island
Top
User avatar
Breadman
Posts: 126
Joined: Thu Jul 20, 2006 7:50 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Gabriola Island, BC

Post by Breadman »

it should unlock if you put it in reverse for a 15 feet and then drive forward again, conversely if you are 4wheeling in reverse then use forward to unlock the hubs. there is plenty of info about them here and on the uk site.
welcome to the club
paul
a few islands north
Top
kog
Posts: 8
Joined: Mon Nov 27, 2006 10:08 pm
Member's Photo Album: http://www.delica.ca/Photos/
Location: Sooke, B.C

wheel lock light

Post by kog »

I find that i only need to reverse for a few feet then go forward the same...
Top
User avatar
Breadman
Posts: 126
Joined: Thu Jul 20, 2006 7:50 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Gabriola Island, BC

Post by Breadman »

okay maybe 15 feet was a bit of a stretch, would you belive 5 feet then.
paul
Top
PJkayda
Posts: 8
Joined: Fri Apr 06, 2007 7:33 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Abbotsford

thank you for answering my question, before i asked it...

Post by PJkayda »

you lucky dogs get to drive delica's and live in the islands...
Top
Post Reply

Return to “L300 Technical”