Pro-Active...

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

Post Reply
piyeguyo
Posts: 171
Joined: Wed May 02, 2007 9:55 am
Vehicle: 1991 Super Exceed
Location: Calgary, AB

Pro-Active...

Post by piyeguyo »

I'm editing, but not retracting from my position...

However, I'm going to try to talk to the owner when I come back from my holidays. Maybe he can talk to his people and straighten them out.

:M
Last edited by piyeguyo on Wed Jun 25, 2008 7:57 am, edited 1 time in total.
Adrock
Posts: 750
Joined: Fri Jan 12, 2007 11:02 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Richmond B.C.

Re: Pro-Active... stay way if you can

Post by Adrock »

details when you cool off?

Otherwise its just one more complaint that gets lost with everything else. Not to mention quite possibly unfair to pro active.... don't want people to be giving them the benefit of the doubt due to lack of details... if you can, stick it to em, if not, whats the point in saying anything?

sounds lame though.
"if its so hard to pull on your knob, put some greese/wd40 on the shaft and pull in and out, that should make it happen for you."
-westcoastnewbie
Image
piyeguyo
Posts: 171
Joined: Wed May 02, 2007 9:55 am
Vehicle: 1991 Super Exceed
Location: Calgary, AB

Re: Pro-Active...

Post by piyeguyo »

You're right Adrock. I edited my post and I'm going to give Pro-Active another chance as the mechanics there are good, and maybe the only ones who have the knowledge here in Calgary.

Thx for the reply.
Adrock
Posts: 750
Joined: Fri Jan 12, 2007 11:02 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Richmond B.C.

Re: Pro-Active...

Post by Adrock »

that wasnt really my point. If you have something valid go for it... sounds like you do and id be upset about the trip too. JUst without details no one will take it seriously.
"if its so hard to pull on your knob, put some greese/wd40 on the shaft and pull in and out, that should make it happen for you."
-westcoastnewbie
Image
Post Reply

Return to “General Discussion”