Spoiler clips?

[mararmeisto]

I'm looking for at least two, intact clips which hold the spoiler onto the rear gate. If you've removed your spoiler and don't intend to replace it, I would appreciate a PM so we can discuss how I can take the clips off your hands (maybe the exchange of goods).

Crappy cell phone picture

Photo_20080629_114126.jpg (23.68 KiB) Viewed 1976 times

I removed my spoiler in order to repair it, and one of the clips broke and another had difficulty with the set screws. Considering these clips are nearly 20 years old, I thought I was doing pretty good.

[MardyDelica]

Hi, paul, i have same problem.
i will check tomorrow if the place is open.
i see similar to that clip,
just maybe need fabrication let you know the outcome.
cheers;
mardy

[mararmeisto]

No longer to worry, I made some in my garage. Stainless steel, a hammer, an anvil, a drill, tapping set and voila!

[MardyDelica]

Hi, wow, good for you paul, can you pls send us the picture when you have time pls. mind is also rusted. i need to do modification, i havent been to the other place i mention is see sometine look alike.
cheers;
Mardy

[mararmeisto]

If you can manage to get an old clip off without busting it in half (I got three off intact, but the fourth didn't want to play nice), just replicate them. I used some flat strips of stainless steel, fold it into the shape of a 'U', cut it to the lengths you want, drill the holes, tap them, and there you go. The hardest part is the bending - would be best if you could get a metal shop to fold up a one or two metre length, and then you cut it up to the appropriate short lengths.

[MardyDelica]

i see, thank you, Paul,
cheers;