Brake fluid

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
jellybean
Posts: 7
Joined: Wed Sep 03, 2008 7:16 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1990 delica

Brake fluid

Post by jellybean »

Just doing the front brake conversion today and i was wondering what type of brake fluid to put back in. Dot 3 or Dot4.
Cheers
Alan
EricN
Posts: 394
Joined: Tue Aug 07, 2007 7:49 am
Vehicle: 90 exceed
Location: Coquitlam

Re: Brake fluid

Post by EricN »

Doesnt matter. Basically the same thing, different boiling points.
jellybean
Posts: 7
Joined: Wed Sep 03, 2008 7:16 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1990 delica

Re: Brake fluid

Post by jellybean »

Thanks for the reply. It says on the inside of the dash cover to use Dot3. I did the brake conversion on the front yesterday had a hell of a time splitting the hub from the rotor. Did the rear brakes today and installed a new gas tank because mine was rusty. To busy to take any picks. On my way to mexico next week.
cheers
alan
User avatar
dfnder
Posts: 526
Joined: Wed Mar 05, 2008 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '91 Exceed
Location: Squamish

Re: Brake fluid

Post by dfnder »

An old girlfriend of mine used to have neighbors that took a motorthome to Mexico every year, on the way back they would fill one water tank with kaluha. Don't think I would try it with a gas tank :)
Post Reply

Return to “L300 Technical”