Anyone know of a reputable place to have some Transmission Mount bushings fabricated? Or know of a good material to use? I could have a co-worker fabricated them for me but I have no idea what would be the best material. I have replaced the two mounts coming off the rear of the transmission (brackets and all) but the rest of them are looking pretty worn. I have talked to a few suppliers on here about ordering some but them seem to be very expensive. It’s just the bushings themselves that need replacing not the brackets. Any suggestions?
Thanks
Chris
Mount Suggestions
-
BCDelica
- Posts: 1808
- Joined: Tue Jul 18, 2006 4:12 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=10008
- Vehicle: WVO Powered Tuk Tuk
- Location: Central Van Isle
- Location: Somewhere with plenty of sun
Re: Mount Suggestions
Welcome Chris, years back we just took our first Delica to the shop down the road (wheel, tire and mechanic) in our small town; and took three days for them to source or fab what they needed to replace all the rubber bits. Then drove another 100,000km's just fine before selling her last month.
Regards,
Kevin
Regards,
Kevin
Call me BCDelica-less