Seem to be having a problem opening my sliding door. I can open it from the inside but not from outside. Any ideas as to how to fix it?
Cheers
Sliding door handle not working
-
- Posts: 123
- Joined: Thu Feb 07, 2008 10:44 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 02 V6 SE
- Location: Winnipeg
- MardyDelica
- Posts: 2190
- Joined: Sun Jan 14, 2007 3:32 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: DL#30843 /92 Delica Super Exceed
- Location: Richmond B.C.
- Contact:
Re: Sliding door handle not working
Hi, robert, you should open maybe check the gap between the robber sealant towards the door put little silicone & it will make it easy to open but if the rubber is sticking in the door then its hard. buy from cnadian tire it say silicone woth 6 or 8 dollar then apply to the rubber from sticking the center door.
call me if this wont work. enjoy your ride.
cheers;
Mardy
call me if this wont work. enjoy your ride.
cheers;
Mardy
-
- Posts: 123
- Joined: Thu Feb 07, 2008 10:44 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 02 V6 SE
- Location: Winnipeg
Re: Sliding door handle not working
Thanks Mardy.
The problem seems to have gone away for now. It was not an issue with the rubber seal around the opening rather a mechanical issue. When I attempted to open the door from the outside, I would not feel the leaver engage. I am thinking it may have been iced up.
I will let you know if it becomes a problem again.
Cheers
The problem seems to have gone away for now. It was not an issue with the rubber seal around the opening rather a mechanical issue. When I attempted to open the door from the outside, I would not feel the leaver engage. I am thinking it may have been iced up.
I will let you know if it becomes a problem again.
Cheers
- MardyDelica
- Posts: 2190
- Joined: Sun Jan 14, 2007 3:32 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: DL#30843 /92 Delica Super Exceed
- Location: Richmond B.C.
- Contact:
Re: Sliding door handle not working
hi, put small little bit lubricant for de-icer. it should work.
your welcome any time robert.
cheers;
your welcome any time robert.
cheers;