Superwinch Manual hubs - GROUP BUY - DONE

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

User avatar
konadog
Posts: 1815
Joined: Tue Feb 26, 2008 9:25 pm
Vehicle: 1992 GLX L-300
Location: Campbell River, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by konadog »

Bessie the Mud Slayer wrote: I enjoy not having to get 'outta da bus' to get my 4 wheel on.
You don't have to - open your door and look down - the hub is right below your butt - just reach down and click it in or out. And even if you don't have a passanger with you to do the other side, you can still get to it by stretching / climbing over there. That's how I do it, even if the weather isn't overly grim, 'cause like you I don't like to get out! Of course there is also the option of simply leaving the hubs locked while the weather is grim and popping in and out of 4x4 as needed - I do that too :M :-D
Image
Happy Day!
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by jessef »

rps13 wrote:This may be a stupid question as Im not super familiar with 4 wheel drive systems...Will that Wheel lock light still come on when they are locked with the manual hubs?

Im assuming it will cause there's probably a sensor somewhere along the line..
Yes. The sensor still comes on. If you lock one or both sides, the wheel lock light will come on.
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by jessef »

6 people are in the group buy.

I'll make the purchase tomorrow.

Anymore interested before I click the order button ?
User avatar
Golf Cart
Posts: 857
Joined: Tue Jul 15, 2008 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Exceed
Location: Maple Ridge

Re: Superwinch Manual hubs - GROUP BUY

Post by Golf Cart »

Might be an idea to have "Hub Scrum" this weekend for the dudes/dudettes all interested . Have coffee, make a contribution, fix Jesse up with a GPS tracking device so he doesn't slip down to Tulalup Casino for a quick game of Pai Gow Fan Tan.

Jesse, did you want US coin, or will the Canadian equivalent be okay ?
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by jessef »

Canadian will be fine.

I'm putting the order through my visa. Will have to load it up today. I'm a pay-no-interest-to-credit-company person. :-D
User avatar
Luna-Sea
Posts: 762
Joined: Mon Nov 24, 2008 4:35 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 90xeed+91cmnix,bth5spdz
Location: Nanaimo BC

Re: Superwinch Manual hubs - GROUP BUY

Post by Luna-Sea »

Whats the total all in? Wanna get that to ya!
User avatar
Erebus
Posts: 1369
Joined: Mon May 28, 2007 7:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Super Exceed
Location: Edmonton, Alberta
Location: Edmonton (was Calgary until 2017), Alberta, Canada
Contact:

Re: Superwinch Manual hubs - GROUP BUY

Post by Erebus »

I'll take a set too. Will have to get it to Calgary somehow, but there seems to be enough Delica traffic between Vancouver and Calgary it shouldn't be hard.

I can mail you a cheque. Just PM me your address.

Looking at your photos, the "free" and "locked" are in Japanese, not English. Will this be the case for the new ones too?

EDIT: went to superwinch site, and find it actuallys says "4x2" and "4x4" but upside down and with a funny typeface, it looked like Japanese.
Image "I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by jessef »

4x4 and 4x2. Yankee style. :M
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by jessef »

Group buyers :M

Golf Cart
Luna-Sea
dfnder
mararmeisto
fexlboi
kb&2dogs
Erebus

Will have a total when my visa gets billed.

Should be around $120 + taxes.

ORDER COMPLETED :M :M :M
User avatar
Erebus
Posts: 1369
Joined: Mon May 28, 2007 7:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Super Exceed
Location: Edmonton, Alberta
Location: Edmonton (was Calgary until 2017), Alberta, Canada
Contact:

Re: Superwinch Manual hubs - GROUP BUY

Post by Erebus »

jfarsang wrote:Yes. The sensor still comes on. If you lock one or both sides, the wheel lock light will come on.
What happens if you lock only one hub? Not to the light, but to the entire drivetrain. Seems to me that all the torque would go to the half-shaft that isn't locked, thereby doing almost nothing. Is that right?
Image "I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY

Post by jessef »

Erebus wrote:
jfarsang wrote:Yes. The sensor still comes on. If you lock one or both sides, the wheel lock light will come on.
What happens if you lock only one hub? Not to the light, but to the entire drivetrain. Seems to me that all the torque would go to the half-shaft that isn't locked, thereby doing almost nothing. Is that right?
Yep. Not much but can help if you have only two feet on the ground (one back one front) negligible though.
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY - DONE

Post by jessef »

Got the bill. Hubs are on their way. Will pick them up next week.

Summit racing (7 sets of hubs)

835 CAN - Visa

59 - PST 7%
42 - GST 5%

Total = 931

/ 7 = $133 ea.

I won't have to pay duty on them because they are auto parts. :-D

Call it $140 ea CDN all incl. taxes. :M

Live in Kits and work in Burnaby across from BCIT. I'll let you guys know when I've got them.
User avatar
kidwrecked
Posts: 58
Joined: Wed Apr 30, 2008 11:04 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Jade High Roof
Location: Kersley, BC
Location: Kersley, BC

Re: Superwinch Manual hubs - GROUP BUY - DONE

Post by kidwrecked »

I'm in if not too late

I may be jumpnig the gun but I may be able to help with a group install date.

Andrew
User avatar
kidwrecked
Posts: 58
Joined: Wed Apr 30, 2008 11:04 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Jade High Roof
Location: Kersley, BC
Location: Kersley, BC

Re: Superwinch Manual hubs - GROUP BUY - DONE

Post by kidwrecked »

Ok
I just saw that I am too late (I type slow and I am trying to get parts for a broken van)

Andrew
User avatar
Profister
Posts: 963
Joined: Fri Feb 08, 2008 3:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1999 PE8W Chamonix, EFI
Location: North Vancouver, BC

Re: Superwinch Manual hubs - GROUP BUY - DONE

Post by Profister »

Damn! I missed this one skiing out of town!
Image
Post Reply

Return to “Delica Modifications”