sliding door lock

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
drrod
Posts: 167
Joined: Thu Jun 19, 2008 9:19 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 93 Exceed
Location: Calgary, Alberta

sliding door lock

Post by drrod »

I discovered something interesting during the recent deep freeze. While letting the van warm up I had the sliding door open. I pushed the lock button down and closed the door. I then could not get the door to unlock; either using the key in the drivers door or manually. The cure.....turn the ignition off and on again and voila, the door lock operated normally. Is this normal or unique to our van? I tried it several times and the results were the same. ie. push the lock down manually with the ignition on, door open and then close the door and the lock becomes inoperative. Cycle the ignition and it returns to normal.
Just thought I would post this in case someone accidentally locks the sliding door manually with the van running and then cannot open it again.
Rod
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: sliding door lock

Post by jessef »

I had the same problem in Whistler when it got nice and chilly.

Figured it was just mine. :-D
drrod
Posts: 167
Joined: Thu Jun 19, 2008 9:19 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 93 Exceed
Location: Calgary, Alberta

Re: sliding door lock

Post by drrod »

I don't know if this quirk exists when it is warm or not. Haven't had the opportunity to try it.
Rod
User avatar
Golf Cart
Posts: 857
Joined: Tue Jul 15, 2008 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Exceed
Location: Maple Ridge

Re: sliding door lock

Post by Golf Cart »

Mine was doing the same thing - Started at the 4x4 Toy run. Seemed to get worse as it got colder. The key worked fine. It wouldnt unlock when you opened up the driver door. Sounds like the actuator is gummed up, or the solenoid is sticking.
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
User avatar
Erebus
Posts: 1369
Joined: Mon May 28, 2007 7:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Super Exceed
Location: Edmonton, Alberta
Location: Edmonton (was Calgary until 2017), Alberta, Canada
Contact:

Re: sliding door lock

Post by Erebus »

Mine is fine. Driver's door locks/unlocks slider only if it is closed. If open, has no effect. If I manually lock the slider when open and close it, it is locked. And the driver's door still unlocks/locks it just fine. Does sound like the solenoid or whatever is in the slider is misbehaving.

Oh, are you pushing the slider's lock button ALL the way down? Maybe you are only going most of the way down, and that's the problem? Just a thought.
Image "I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
User avatar
The Pinkfingers
Posts: 483
Joined: Sat Apr 12, 2008 9:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '94 Exceed
Location: North Van, BC

Re: sliding door lock

Post by The Pinkfingers »

Mine gets stuck too. Sometimes it takes several minutes to get that door unlocked - even pulling up on the lock from the inside doesn't help at times. The only person in our family who never has trouble with it is my three year old daughter. Don't ask me why, but she can unlock that door first try every time! The rest of us... not so much.
Green1
Posts: 3257
Joined: Wed Jul 19, 2006 9:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 L400 Royal Exceed PF8W
Location: Calgary Alberta Canada
Contact:

Re: sliding door lock

Post by Green1 »

last night had some passengers back there and we had a sudden panic attack when the door handle inside stopped being able to open the door, at -20c I figured something was frozen/broken...

after a little while arguing with it I discovered someone had flipped the child-lock... :oops:
Post Reply

Return to “L300 Technical”