Trannies
-
- Posts: 279
- Joined: Sun Nov 23, 2008 8:27 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed/Yamaha Scooter
- Location: North Vancouver
Trannies
Hello, my question is, how does everyone find the Auto Tranny on the Delica and Pajero. I have found the North American vehicles crap out at around 150k. Has anyone had issues with theirs? Due to the reason some of these vehicles are very close to 150k.
Also does anyone know the towing capacity of the 2 door and 4 door Pajero. Or is it not a good ida to tow with the 4 banger turbo?
Thanks much.
Also does anyone know the towing capacity of the 2 door and 4 door Pajero. Or is it not a good ida to tow with the 4 banger turbo?
Thanks much.
Keep your tip down and your line tight......happy fishn
Stay away from North Shore RV
Stay away from North Shore RV
- Erebus
- Posts: 1369
- Joined: Mon May 28, 2007 7:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed
- Location: Edmonton, Alberta
- Location: Edmonton (was Calgary until 2017), Alberta, Canada
- Contact:
Re: Trannies
No one on this forum has really reported any tranny issues, and there are plenty with 200,000+ km on them. Towing any trailer will add stress, depending on your driving style, the weight and aerodynamics of the trailer. So, short answer, small trailer fine, bigger one maybe.

- FalcoColumbarius
- Site Admin
- Posts: 5983
- Joined: Tue Jan 22, 2008 1:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
- Vehicle: Delica; Chamonix GLX ('92 P25W)
- Location: North Van, BC, eh?
Re: Trannies
The only tranny issue that I have heard of is related to the shifter, itself. I've had no issues.
Falco.
Falco.
Sent from my smart pad, using a pen.
Seek Beauty...
Good Ship Miss Lil' Bitchi
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Seek Beauty...
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
- delicat
- Posts: 2331
- Joined: Thu Jul 26, 2007 6:26 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '92 Exeed '93 Safari '94 Pajero
- Location: New Westminster, BC
- Location: New Westminster, BC
Re: Trannies
" I have found the North American vehicles crap out at around 150k."
There's the answer to your question... Delica aren't NA vehicles! From speaking with some Delica mechanics trannies aren't too much of a concern on these vehicles. If my previous '78 VW camper with an auto tranny never failed on me after km over km, I'm very confident with the Mistsu ones...
Mararmeisto regularly uses a trailer, he'd be a good one to ask.
Good luck!
There's the answer to your question... Delica aren't NA vehicles! From speaking with some Delica mechanics trannies aren't too much of a concern on these vehicles. If my previous '78 VW camper with an auto tranny never failed on me after km over km, I'm very confident with the Mistsu ones...
Mararmeisto regularly uses a trailer, he'd be a good one to ask.
Good luck!
'93 Nissan Patrol
'94 Mitsubishi Pajero

"If it ain't broken, modify it!"
'94 Mitsubishi Pajero

"If it ain't broken, modify it!"
-
- Posts: 279
- Joined: Sun Nov 23, 2008 8:27 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed/Yamaha Scooter
- Location: North Vancouver
Re: Trannies
Thanks all, for the responses. I would just hate to get a new ride and then have to plkunk down an additional $2000.00-2,400.00 for a rebuild down the road. Also I would be pulling my 13' Boler. So for sure not a huge Trailer.
Keep your tip down and your line tight......happy fishn
Stay away from North Shore RV
Stay away from North Shore RV
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Trannies
If you're towing lots the following would help :
Re-arch rear leaf packs
Pyrometer to monitor exh temps
Intercooler for the added pull
As for the tranny. They are reliable compared to many domestic vehicles but they are still a used vehicle. The Delica's can brake down and do need regular maintenance just like any other vehicle. Buying a used Delica, you are in the same boat as buying a used local vehicle. Just different/usually better condition. But it's still a used vehicle (ie. problems can happen).
Re-arch rear leaf packs
Pyrometer to monitor exh temps
Intercooler for the added pull
As for the tranny. They are reliable compared to many domestic vehicles but they are still a used vehicle. The Delica's can brake down and do need regular maintenance just like any other vehicle. Buying a used Delica, you are in the same boat as buying a used local vehicle. Just different/usually better condition. But it's still a used vehicle (ie. problems can happen).
- The Pinkfingers
- Posts: 483
- Joined: Sat Apr 12, 2008 9:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '94 Exceed
- Location: North Van, BC
Re: Trannies
I have. Had to have a transmission overhaul at about 66,000 km. We're the exception that proves the rule, I guess.Erebus wrote:No one on this forum has really reported any tranny issues,
http://www.delica.ca/forum/mysterious-i ... -3394.html
- impalator
- Posts: 309
- Joined: Sat Sep 06, 2008 7:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300
- Location: Tri-Cities
Re: Trannies
I thought the automatic transmission on delicas actually comes from Chrysler.... thought I read this somewhere on this forum...?!
But I guess with the fairly limited power these diesels generate, a transmission is not put to work all that hard?! When doing hills, I let it shift down to where it needs to go and then lock it (either in O/D off or 2nd) until it flattens out. That way it won't keep shifting up and down all the time which I understand is the worst part for a transmission.
I once heard that when you are looking to buy a classic Dodge Dart or a Ford Mustang for restauration etc. you should look for the 6 cylinder versions as the transmissions on these are usually in good shape whereas the V8's are usually worn right out... if that is true, then a Chrysler transmission should last a while in a Delica...
Cheers, Chris
But I guess with the fairly limited power these diesels generate, a transmission is not put to work all that hard?! When doing hills, I let it shift down to where it needs to go and then lock it (either in O/D off or 2nd) until it flattens out. That way it won't keep shifting up and down all the time which I understand is the worst part for a transmission.
I once heard that when you are looking to buy a classic Dodge Dart or a Ford Mustang for restauration etc. you should look for the 6 cylinder versions as the transmissions on these are usually in good shape whereas the V8's are usually worn right out... if that is true, then a Chrysler transmission should last a while in a Delica...
Cheers, Chris
- konadog
- Posts: 1815
- Joined: Tue Feb 26, 2008 9:25 pm
- Vehicle: 1992 GLX L-300
- Location: Campbell River, BC
Re: Trannies
impalator wrote:I thought the automatic transmission on delicas actually comes from Chrysler....




Happy Day!
- impalator
- Posts: 309
- Joined: Sat Sep 06, 2008 7:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300
- Location: Tri-Cities
Re: Trannies
Strange indeed, that Chrysler thing.... but I did read it in this forum (see below, 2nd post from the top....)
I guess the good news is that J**P's are among the most proven off-road vehicles - and if they can manage with such a trannie, so should the Delica.....
http://www.delica.ca/forum/automatic-tr ... .html#p593
I guess the good news is that J**P's are among the most proven off-road vehicles - and if they can manage with such a trannie, so should the Delica.....
http://www.delica.ca/forum/automatic-tr ... .html#p593
- loki
- Posts: 1428
- Joined: Sun Dec 16, 2007 12:18 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 Delica Royal Exceed
- Location: Victoria, BC
Re: Trannies
konadog wrote:Maybe they're Mitsubishi made trannys used in Chyrslers...
more likely
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Trannies
Bingokonadog wrote:Maybe they're Mitsubishi made trannys used in Chyrslers...

- mararmeisto
- Posts: 3276
- Joined: Wed Sep 19, 2007 10:00 am
- Vehicle: 2018 Ram EcoDiesel
- Location: Dartmouth, NS
Re: Trannies
Ya, I think I would double-BINGO that. Waaaaaaaaay more likely that Chrylser was putting Mitsu trannies into NAPOS than Mitsubishi was putting NAPOS-trannies into their vehicles.jfarsang wrote:Bingokonadog wrote:Maybe they're Mitsubishi made trannys used in Chyrslers...
As to the towing, yes, I do tow (but I don't inhale) a couple of trailers. Since I've not yet got a clear idea of how much these vehicles will tow, I do know this:
- the trailer shown in the accessories pamphlet has a sticker which indicates "250kg"
the back of a Mitsubishi Pajero has a sticker which indicates "350kg"
and I saw a Strada with a sticker which indicated "500kg".
The only thing I change when towing a trailer is not to push the van any harder than I usually do, which means slower accelerations and longer coasts-before-breaking (or brake with the engine). I've thought of making up a bumper sticker which says, "And you thought that VW bus on the last hill was slow!"
JPL
I still miss my '94 Pajero!
I still miss my '94 Pajero!
- impalator
- Posts: 309
- Joined: Sat Sep 06, 2008 7:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300
- Location: Tri-Cities
Re: Trannies
Hello again,
I will mount a trailer hitch onto my Delica coming this spring / summer as I want to be able to launch my inflatable/outboard (16ft. Hondamarine with Aluminum Floors and 25hp outboard) in Shuswap lake...
I won't drive any crazy distances with the trailer on as the boat is stored in our cabin/garage which is only about 2km's from the boat-ramp... and the boat with outboard weighs around 145kg's... and it's just a small little boat trailer that I am using.... My concern is only: When backing down the boat ramp, how low will I have to go to get the boat floating off the trailer? Don't want to drive the Van right down into the water....
PS: I like the idea of a Mitsubishi Transmission that is also used in Mopar vehicles much better than the other way round....
I will mount a trailer hitch onto my Delica coming this spring / summer as I want to be able to launch my inflatable/outboard (16ft. Hondamarine with Aluminum Floors and 25hp outboard) in Shuswap lake...
I won't drive any crazy distances with the trailer on as the boat is stored in our cabin/garage which is only about 2km's from the boat-ramp... and the boat with outboard weighs around 145kg's... and it's just a small little boat trailer that I am using.... My concern is only: When backing down the boat ramp, how low will I have to go to get the boat floating off the trailer? Don't want to drive the Van right down into the water....
PS: I like the idea of a Mitsubishi Transmission that is also used in Mopar vehicles much better than the other way round....