type of fuel pump?

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
loki
Posts: 1428
Joined: Sun Dec 16, 2007 12:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 Delica Royal Exceed
Location: Victoria, BC

type of fuel pump?

Post by loki »

what type of fuel pump is on the deli? rotary, inline or what? I just want to check as I'm going to attempt my WVO conversion tomorrow and there is something that is specific to rotary (distributor style) pumps.
User avatar
BCDelica
Posts: 1808
Joined: Tue Jul 18, 2006 4:12 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=10008
Vehicle: WVO Powered Tuk Tuk
Location: Central Van Isle
Location: Somewhere with plenty of sun

Re: type of fuel pump?

Post by BCDelica »

Rotary.

Glad you found the time for your Elsbett install, hope it goes smoothly. Please share some install pictures with us (we've all been patient enough :razz: )
Image Call me BCDelica-less
User avatar
loki
Posts: 1428
Joined: Sun Dec 16, 2007 12:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 Delica Royal Exceed
Location: Victoria, BC

Re: type of fuel pump?

Post by loki »

BCDelica wrote:Rotary.

Glad you found the time for your Elsbett install, hope it goes smoothly. Please share some install pictures with us (we've all been patient enough :razz: )
I plan to take lots of pics. I hope I don't run low on time, I was thinking of building the filter first but I'm reconsidering, the van should probably go first so if I hit a snag I have time to fix it, the filter can happen anytime anywhere really, it's not that technical. The only thing I'm not sure about at the moment is the heat washers for the injectors, I don't think they come in the kit but it says you need to replace them anytime you pull the injectors, how big a deal is it if I have to put the injectors back in with the old ones for a week or so till I get the new ones.

I'm pretty stoked about the install though, fingers crossed :)
Post Reply

Return to “L300 Technical”