Polyurethane shock bushing part number

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
parkside
Posts: 60
Joined: Fri Mar 13, 2009 8:13 am
Member's Photo Album: http://www.delica.ca/Photos/

Polyurethane shock bushing part number

Post by parkside »

Hey guys,

Just in case you need it. The part # for poly shock bushings is...

energy suspensions
Lower: 9.8107G comes in a pair
Upper: 9.8126G comes with two pairs proper thickness, no trimming required.

these are to replace any rubber bushings on the front shocks.
Hope this helps

Jesse Smith
Parkside Automotive
Jesse Smith
Parkside Automotive
304-309-7718
parksideauto@hotmail.com
User avatar
delicat
Posts: 2331
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: Polyurethane shock bushing part number

Post by delicat »

Hey Jesse,

Are these for a specific shock or generic?

Thanks,
D.
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"
User avatar
parkside
Posts: 60
Joined: Fri Mar 13, 2009 8:13 am
Member's Photo Album: http://www.delica.ca/Photos/

Re: Polyurethane shock bushing part number

Post by parkside »

Hi David,

They should fit all shocks except for the shocks that have the lower bushings molded to the body.
the uppers will fit all shocks and make installation MUCH easier.

cheers
Jesse Smith
Jesse Smith
Parkside Automotive
304-309-7718
parksideauto@hotmail.com
Post Reply

Return to “L300 Technical”