Ready to buy.,but....

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

phunka
Posts: 103
Joined: Fri Jan 23, 2009 8:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Location: vancouver,DT

Ready to buy.,but....

Post by phunka »

I found a van, and it's in my price range. The thing is it's a private sale, and I'm not as mechanically inclined as I would like to be. The van is in Burnaby and I am downtown vancouver.

Can anyone recommend a good mechanic/shop in my area to take it to for a once over before I buy?

In the meantime, I've been and will continue reading up on what to look for.

Thanks,
james
phunka
Posts: 103
Joined: Fri Jan 23, 2009 8:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Location: vancouver,DT

Re: Ready to buy.,but....

Post by phunka »

found what i was looking for on the delica wiki...
I think Mardy would be the best/closest.

Still would appreciate anyone in the area willing to come have a look-see! probably going to try and arrange a test drive tomorrow.

**RJD in North Van would be the closest.
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Ready to buy.,but....

Post by jessef »

Shoot me a PM. I'll check it out with you if I'm available.
User avatar
TardisDeli
Posts: 1425
Joined: Tue Sep 18, 2007 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300. 1997 L300.
Location: Burnaby
Location: Burnaby, Gaglardi freeway exit
Contact:

Re: Ready to buy.,but....

Post by TardisDeli »

We're in Burnaby if you want to compare ours. Send us your phone number by PM Private Message (click on New Messages by login on the above banner).

Beware private sales, beware dealers not recommended in the postings by members, save a thousand now by buying unknown but spend 5 thousand later in fixups.

Recommend Mardy for sales / support.
Or CVI (repair garage) will do a thorough inspection


Christine.
User avatar
marsgal42
Posts: 772
Joined: Fri Jul 20, 2007 3:05 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: The Mighty Gumdrop
Location: Burnaby, B.C.

Re: Ready to buy.,but....

Post by marsgal42 »

Split the difference and talk to Adria at Broadway and Fraser.

...laura
phunka
Posts: 103
Joined: Fri Jan 23, 2009 8:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Location: vancouver,DT

Re: Ready to buy.,but....

Post by phunka »

TardisDeli wrote: save a thousand now by buying unknown but spend 5 thousand later in fixups.
Christine.
This is what I worry about. I do think it's a good sign that the guy has no problem with taking it somewhere to have it checked out though. But on the other hand, is he going to say no? hmm....
User avatar
Luna-Sea
Posts: 762
Joined: Mon Nov 24, 2008 4:35 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 90xeed+91cmnix,bth5spdz
Location: Nanaimo BC

Re: Ready to buy.,but....

Post by Luna-Sea »

Holy Crap Feel the love eh!

If you check one on the island I can maybee spin you around.
Glen and the gang at CCautos would be the place I would know to trust
on this rock. You would want to call ahead to book.

Right on! 8-)
User avatar
MardyDelica
Posts: 2190
Joined: Sun Jan 14, 2007 3:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: DL#30843 /92 Delica Super Exceed
Location: Richmond B.C.
Contact:

Re: Ready to buy.,but....

Post by MardyDelica »

hi,
as tardis deli mention its expensive to put the full service together to this delica.
cheers;
Mardy
ImageImageImage
phunka
Posts: 103
Joined: Fri Jan 23, 2009 8:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Location: vancouver,DT

Re: Ready to buy.,but....

Post by phunka »

What would bringing it into a shop for a once over run a guy?
User avatar
MardyDelica
Posts: 2190
Joined: Sun Jan 14, 2007 3:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: DL#30843 /92 Delica Super Exceed
Location: Richmond B.C.
Contact:

Re: Ready to buy.,but....

Post by MardyDelica »

still expensive to do in the shop, its better to the dealer who do all this work for you, warrantty & other thing.
but its up to the buyer where he or she is comfortable dealing with. its just time consuming to do from one end to another.
in the end its up to the buyer choice.
cheers;
ImageImageImage
User avatar
ccautos
Posts: 530
Joined: Fri Sep 15, 2006 11:25 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Delica SE
Location: Coombs , BC
Contact:

Re: Ready to buy.,but....

Post by ccautos »

To do a once over pre-purchase inspection should cost no more than $50. It takes less than one hour to pull the wheels and check it over thoroughly. Ask prior and make sure you take it to `licensed`mechanics to get it checked out. That way you insure to get a `qualified` opinion of the vehicle that can pay off in savings in the future.
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Ready to buy.,but....

Post by FalcoColumbarius »

The guy I had check mine out charged me $200.00, but he also had the engine somewhat apart to inspect it as well.

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
danfromvan
Posts: 112
Joined: Tue Jan 01, 2008 5:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '93 p25w Jasper auto
Location: North Vancouver

Re: Ready to buy.,but....

Post by danfromvan »

My pre-purchase inspection cost me $80 at RJD Services in North Van (Nathan) for about one hour + to put it up on the hoist, pull the wheels and give if a good once-over.

Found leaking valve cover gasket, leaking injection pump, wheel lock light problem and rear sway bar links needed replacing. Also recommended replacing timing belt, balancing belt, water pump and seals.

Dealer then agreed to have all of this done except for sway bar links before I purchased.

Well worth the $80.
:M :M :M
:M Dan :M
ImageImageImage
User avatar
Profister
Posts: 963
Joined: Fri Feb 08, 2008 3:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1999 PE8W Chamonix, EFI
Location: North Vancouver, BC

Re: Ready to buy.,but....

Post by Profister »

Beware private sales,
How about Josh who is not a stranger to the community selling his bus? If I needed another Delica I would buy it from him. :M
Image
User avatar
TardisDeli
Posts: 1425
Joined: Tue Sep 18, 2007 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300. 1997 L300.
Location: Burnaby
Location: Burnaby, Gaglardi freeway exit
Contact:

Re: Ready to buy.,but....

Post by TardisDeli »

Phunka,

I agree with Profister, you should look at Josh's wonderful silver van for sale.

When I say "beware private sales" I mean those people who are NOT regular contributors to this forum. One can read all the posts from Josh, so you know he has done all the maintenance.

Cheers, Christine.
Last edited by TardisDeli on Wed Apr 08, 2009 8:00 am, edited 1 time in total.
Post Reply

Return to “General Discussion”