Front brake flex line part #s?

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
loki
Posts: 1428
Joined: Sun Dec 16, 2007 12:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 Delica Royal Exceed
Location: Victoria, BC

Front brake flex line part #s?

Post by loki »

anyone have NA cross matched front brake flex line part #s?

I blew one out last night and need to replace all 4 now. I got the JDM part # but that does little for me MR129771 & MR129744.

I got the one hose off in the lordco parking lot about 1 minute after they closed so I couldn't match it up, I will take the other one off and take them in tonight if I can't get the part #s here.
User avatar
loki
Posts: 1428
Joined: Sun Dec 16, 2007 12:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 Delica Royal Exceed
Location: Victoria, BC

Re: Front brake flex line part #s?

Post by loki »

ok so I found the bottom hose part # the napa one crossed to a lordco # I will post it later after I see it.
SpyderCS wrote:Figured it out. Ordered from Napa the part is 38418. It looks about 1/4 inch longer. Works perfectly.
still need numbers for the top ones though
User avatar
loki
Posts: 1428
Joined: Sun Dec 16, 2007 12:18 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 Delica Royal Exceed
Location: Victoria, BC

Re: Front brake flex line part #s?

Post by loki »

loki wrote:ok so I found the bottom hose part # the napa one crossed to a lordco # I will post it later after I see it.
SpyderCS wrote:Figured it out. Ordered from Napa the part is 38418. It looks about 1/4 inch longer. Works perfectly.
still need numbers for the top ones though
just ordered the top ones, will see them tomorrow, we looked up what the bottom ones where from and guess what, 86 montero or dodge raider, so we looked up all the hoses for that and bingo the upper (inner) one was there and the picture matched perfectly. I should be able to pick them up Sunday or late Saturday and make sure they are right and post up the numbers.
Post Reply

Return to “L300 Technical”