tail gate strut wanted

Looking for a specific hard-to-find Delica part? Post your request in this section. Commercial postings can be found in "Delica Trader Parts Section".

Moderators: delicanuck, mark

Post Reply
User avatar
byariver
Posts: 15
Joined: Wed Feb 14, 2007 5:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 exceed
Location: Pemberton, BC

tail gate strut wanted

Post by byariver »

Hey folks,
Looking for a replacement tail gate strut, the driver's side has sprung a leak. Thanks for your time.
Nick
Delicanadabc
Posts: 216
Joined: Thu Nov 22, 2007 12:49 am
Vehicle: Super exceed 91
Location: Vancouver BC
Contact:

Re: tail gate strut wanted

Post by Delicanadabc »

Hello

I can help you with that and I am going to Pemberton over the weekend and I so possibly hook up with you. The struts are rebuilt by Strutwise in Surrey. They can be made slightly longer. The last pair I made a bit of a test and with astounding results. They simply flings the door open with a ladder even on colder days, as in, you have to make sure you take a step back :shock: :shock: !!! Please feel free to call me 778 865 8225.
User avatar
danfromvan
Posts: 112
Joined: Tue Jan 01, 2008 5:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '93 p25w Jasper auto
Location: North Vancouver

Re: tail gate strut wanted

Post by danfromvan »

I can vouch for Strutwise also. I had mine re-gassed about 5 months ago as they wouldn't support the ladder on my Jasper. They now work perfectly. Frank Irvine at Strutwise is a great guy and can fix any strut (you need to do both, I think he was charging $120 for the pair). He turns them around in about a day, maybe two at the most, depending on backlog.

http://www.strutwise.com

If you haven't already done it, you can also make the door open a foot higher by swapping left and right, a neat trick that TardisDeli Jay showed me.
:M Dan :M
ImageImageImage
Post Reply

Return to “Parts Wanted (Non-Commercial)”