KYB part number? And why do many not replace with KYB? Seems to be Rancho's and ProComps's?
Thanks,
Joe
Shocks...
-
joedelica
- Posts: 204
- Joined: Tue Jan 08, 2008 10:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 Exceed XR The Sapporo Can
- Location: VanCity
- Location: VanCity
-
loki
- Posts: 1428
- Joined: Sun Dec 16, 2007 12:18 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 Delica Royal Exceed
- Location: Victoria, BC
Re: Shocks...
joedelica wrote:KYB part number? And why do many not replace with KYB? Seems to be Rancho's and ProComps's?
Thanks,
Joe
kyb where more money and a special order, as in if the part number was wrong you still have to pay for them, and as most of the part numbers I got from the wiki and the site that I was able to look at the part and compare didn't come close I went with the instock rancho that matched almost perfectly, about a half inch longer compressed and a inch and a bit more extension (not to mention the same mounting hardware)
I can't remeber if I ever posted the part number (was only on the rear) but if you call the lordco in Victoria they have a parts list with that on it, at the very least you would be able to cross reference that part to a KYB.