HD Torsion bars???

Looking for a specific hard-to-find Delica part? Post your request in this section. Commercial postings can be found in "Delica Trader Parts Section".

Moderators: delicanuck, mark

Post Reply
pedro
Posts: 131
Joined: Fri Jun 01, 2007 1:46 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: exceed 5 spd
Location: williams lake, bc
Location: williams lake, bc
Contact:

HD Torsion bars???

Post by pedro »

So... after lifting the van 2 inch, I had to get the re ealigned only to discover that the right rear side leaf spring was broken at the wrap around( front attachement). so now I have a super strong rear suspention , the front just can't keep up!!!!!! :shock:

So here is my question, what are my option for torsion bars??? I did found some on delicashop, but I suspect that the shipping will cost as much as the bars :o . Is there anything on this side of the pond ???????? ( maybe montero parts??) or I'm stuck with my old bars until the end of days!!! any tip(s) is apreciated!! Thanks

Pedro

P.S> read "rear diff realigned" on first line.
User avatar
Golf Cart
Posts: 857
Joined: Tue Jul 15, 2008 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Exceed
Location: Maple Ridge

Re: HD Torsion bars???

Post by Golf Cart »

Pedro,

Honeymoon must be over if yur looking for excuses to get back in the garage. Congrats by the way.

Did you try Glen ?

Cheers
Gregg
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: HD Torsion bars???

Post by mararmeisto »

Does "HD torsion bars" mean high-definition? :?
JPL
I still miss my '94 Pajero!
pedro
Posts: 131
Joined: Fri Jun 01, 2007 1:46 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: exceed 5 spd
Location: williams lake, bc
Location: williams lake, bc
Contact:

Re: HD Torsion bars???

Post by pedro »

More like heavy duty 8-)
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: HD Torsion bars???

Post by mararmeisto »

pedro wrote:More like heavy duty 8-)
Okay, that makes more sense.
JPL
I still miss my '94 Pajero!
Post Reply

Return to “Parts Wanted (Non-Commercial)”