If anyone has a functioning internal/external temp display module that sits inside the 3 dial pod (altimeter, angleometer thingy, and temp) I could really use one.
The one I have now barely displays the temps. If I whack it really hard, it gets nice and bright for 5-10 seconds, then quickly goes black again...
Thanks
Steve
Need a new internal/external Temp display for pod
Moderators: delicanuck, mark
-
snelson
- Posts: 406
- Joined: Sat Jan 26, 2008 6:29 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 Delica Exceed
- Location: Banff
- Location: Banff, Alberta
-
Luna-Sea
- Posts: 762
- Joined: Mon Nov 24, 2008 4:35 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 90xeed+91cmnix,bth5spdz
- Location: Nanaimo BC
Re: Need a new internal/external Temp display for pod
I thought I was into my Deli!If I whack it really hard, it gets nice and bright for 5-10 seconds, then quickly goes black again...
Seriously(ish) as always CC auto will send you one,
I also thought I saw a new sender unit on the Japanoid site
a while back.
The one in my high-roof works intermitently at best.
Right on!
-
Profister
- Posts: 963
- Joined: Fri Feb 08, 2008 3:41 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1999 PE8W Chamonix, EFI
- Location: North Vancouver, BC
-
loki
- Posts: 1428
- Joined: Sun Dec 16, 2007 12:18 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 Delica Royal Exceed
- Location: Victoria, BC
Re: Need a new internal/external Temp display for pod
take a look at delcar 300's mods he added led banks behind the units in the pod and really brightened them up.