I replaced the stock front shock absorbers about three years (60 K) ago. Lately I noticed a worsening 'clunk' on the passenger side ecspecially when that that side was unloaded. I have been chasing that clunk without success. Wheel bearings, sway bar bushings, torsion bars, steering rack etc. etc. all check. I neglected on checking the bushings on the shocks becasue they were relatively new! Well, here's the photo of the lower bushings.
There's my 'clunk'. The shocks were fine, but that bushing certainly did not stand up. I was told that I could not just replace the bushing and therefore replaced both front shocks (different brand!).
Is this normal wear?