tank gaskets

loki · Post by **loki** » Fri Sep 18, 2009 8:54 am

I'm going to be dropping the tanks and tanking the sending units out on Saturday, do I need to get new gaskets for them or should the old ones be fine and/or use a little gasket goo?

after oil · Post by **after oil** » Fri Sep 18, 2009 7:22 pm

fwiw the gaskets were totally fine on the three tanks that i have removed the senders from.

loki · Post by **loki** » Fri Sep 18, 2009 7:55 pm

after oil wrote:fwiw the gaskets were totally fine on the three tanks that i have removed the senders from.

perfect, thanks. going to try and get the liner or layer of paint that is in there out, I think it's clogged up the pickup or one of the lines.

after oil · Post by **after oil** » Mon Oct 05, 2009 7:17 am

hi loki, just wondering how this went for you? some tanks dont have liners....

loki · Post by **loki** » Mon Oct 05, 2009 8:39 am

after oil wrote:hi loki, just wondering how this went for you? some tanks dont have liners....

tanks seemed perfectly clean, I'm pretty sure they didn't have a liner at all.

after oil · Post by **after oil** » Mon Oct 05, 2009 12:44 pm

Delica Canada | Mitsubishi Van Club

tank gaskets

tank gaskets

Re: tank gaskets

Re: tank gaskets

Re: tank gaskets

Re: tank gaskets

Re: tank gaskets