Has Anyone put 6.5" door speakers in a 94 pajero?
Thnaks
Joe
DOOR SPEAKER SIZE
-
Pajero
- Posts: 329
- Joined: Wed Sep 30, 2009 4:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 Pajero
- Location: Prince George BC
- Location: Prince George BC
-
Pajero
- Posts: 329
- Joined: Wed Sep 30, 2009 4:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 Pajero
- Location: Prince George BC
- Location: Prince George BC
Re: DOOR SPEAKER SIZE
I just installed the 6.5" alpine type s seakers in the doors and they fit!!! sounds sooo much better mind you the other speakers were blown pretty bad
Joe
Joe
-
etohk
- Posts: 16
- Joined: Mon Oct 19, 2009 10:50 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1993 Pajero
- Location: Victoria, bc
Re: DOOR SPEAKER SIZE
Did you have to use a speaker mount adaptor?
-
Pajero
- Posts: 329
- Joined: Wed Sep 30, 2009 4:21 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 Pajero
- Location: Prince George BC
- Location: Prince George BC
Re: DOOR SPEAKER SIZE
No just used the stock one that was in there already tight fit but worked out great
-
etohk
- Posts: 16
- Joined: Mon Oct 19, 2009 10:50 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1993 Pajero
- Location: Victoria, bc
Re: DOOR SPEAKER SIZE
Hmm, thanks. The 6.5 energy speakers I was trying to fit just couldn't be jammed into the 5" brackets. I bought some adaptors but they didnt fit the bolt pattern of the door or the new speakers. I took a jigsaw and cut the existing brackets out to fit the new speakers and reinstalled...actually worked out great. Now if I can just find the plastic piece that fits the door opening mechanism..... 
-
GISdood
- Posts: 63
- Joined: Tue Aug 05, 2008 9:57 am
- Vehicle: 1993 Mitsubishi Pajero
- Location: Prince George, BC
- Contact:
Re: DOOR SPEAKER SIZE
I managed to shoehorn a pair of 6.5" Alpine components into the stock door locations of my 2.8L 93 LWB . Had to take the dremel and carve out some of the plastic mounting piece to allow room for the crossover coil mounted to the outer edge of the speaker basket, but otherwise they were a pretty simple install. I would imagine coaxials would go in with no trouble at all.