Rear Gate fuse box?

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
Firesong
Posts: 1363
Joined: Tue Feb 03, 2009 9:03 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1998 L400 Delica Chamonix
Location: Saskatoon
Location: Saskatoon, SK. Canada

Rear Gate fuse box?

Post by Firesong »

First: Yes I used search to look

Question. Does the rear gate have it's own fuse in the fuse box?
Looking through the schematic for the fuse box shows no corresponding
fuse for it.

Since I do have this princess auto remote unit I might as well
spend an hour and hook it up to the door locks and rear gate.
And the interior light Im thinking.

FS
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: Rear Gate fuse box?

Post by mararmeisto »

Definitely doesn't have it's own fuse, but try pulling the "door lock" fuse (upper row, rightmost position). That's a 20A fuse and I don't see how that could be for only the two front doors and the side door.

A lot of the fuses double-duty with unlisted or unmentioned systems. For example, the fuse labeled "horn" also includes the power for the stereo and the dash clock (I think it is), but of course the label only indicates "horn" (in Japanese).

I'll take a look at the schematic later today, see if I can provide you a more concrete answer.

EDIT: pretty sure it is on the same fuse as I indicated above. I checked the schematic this afternoon, and that's where it looks like it is coming from. Good choice as it comes straight from the battery and is not switched through the ignition.
JPL
I still miss my '94 Pajero!
Green1
Posts: 3257
Joined: Wed Jul 19, 2006 9:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 L400 Royal Exceed PF8W
Location: Calgary Alberta Canada
Contact:

Re: Rear Gate fuse box?

Post by Green1 »

in the L300 your best bet for doing the rear gate is to attach your wires to the back of the gate lock/unlock switch on the dash (that's the way my alarm was wired, seemed to work well.
Post Reply

Return to “L300 Technical”