Good deal on multi-gauges system

Mitsubishi Delica part numbers and purchasing information.
Post Reply
User avatar
delicat
Posts: 2331
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Good deal on multi-gauges system

Post by delicat »

I'll be getting one of these, just spoke to them and they put the discount back on their site...
http://www.rovingrecovery.com/madman.htm

Cheers,
David
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: Good deal on multi-gauges system

Post by after oil »

8-)
User avatar
delicat
Posts: 2331
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: Good deal on multi-gauges system

Post by delicat »

Ari, are you thinking what I'm thinking... use the oil temp and coolant temp sensors to monitor your wvo???
I'm pretty sure the sale ends at midnight.
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: Good deal on multi-gauges system

Post by after oil »

delicat wrote:Ari, are you thinking what I'm thinking... use the oil temp and coolant temp sensors to monitor your wvo???
I'm pretty sure the sale ends at midnight.
mainly i was just thinking "cool" 8-)
but i definitely thought about how it would enhance the wvo experience. i trust the stock temp sensor to do its thing...
User avatar
Erebus
Posts: 1369
Joined: Mon May 28, 2007 7:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Super Exceed
Location: Edmonton, Alberta
Location: Edmonton (was Calgary until 2017), Alberta, Canada
Contact:

Re: Good deal on multi-gauges system

Post by Erebus »

Sweet. That is one very nice unit. Not much more expensive than an EGT by itself, saves a lot of dash space.

The sale price is still showing right now (4 Jan).

This should be posted cross-posted to the Mods and/or General forums!
Image "I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
User avatar
danfromvan
Posts: 112
Joined: Tue Jan 01, 2008 5:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '93 p25w Jasper auto
Location: North Vancouver

Re: Good deal on multi-gauges system

Post by danfromvan »

Can we assume it will fit in the normal Delica dash pod to replace the inclinometer or the altimeter?
:M Dan :M
ImageImageImage
User avatar
Erebus
Posts: 1369
Joined: Mon May 28, 2007 7:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Super Exceed
Location: Edmonton, Alberta
Location: Edmonton (was Calgary until 2017), Alberta, Canada
Contact:

Re: Good deal on multi-gauges system

Post by Erebus »

I'm thinking the square one should. The install template shows a 57.9 mm hole with the crews being on a 67mm diameter circle.

That's pretty close to the 2.25 or 2.5" holes standard North American gauges use. The EMS-1 is a much larger rectangle, but would probably fit quite nicely above the speedo/tach cluster.
Image "I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".
Post Reply

Return to “Delica Parts for Sale (Non-Commercial)”