Looking for a Skid Plate for my L300

[fexlboi]

The mounting brackets are different between an auto and a 5spd. You would need to cut, bend, drill the skit plate to fit on a manual. Maybe "Pedro" can explain it a little bit more in depth, he did the modification on his 5spd.

[STL]

Any idea where to find one for a manual 5 sp .... and LHD?

Thanks.

STL

[fishslapper]

The reason it won't' fit a 5 speed is that the bottom "lip" guiding the air into the rad is different ...It could be done though. Just have to make a little adapter bracket of some sort.

Sorry Brian about not getting back sooner.50 hours a week a 2 year old and a newborn are making "me" time next to impossible !! lol's

I guess we might as well start a running tally on this thread eh? !!

the price i would keep the same 170 per plate. Even if aluminum has gone up.........no big deal.

cheers

[MitsuDeli]

Sorry Brian about not getting back sooner.50 hours a week a 2 year old and a newborn are making "me" time next to impossible !! lol's

No need to apologize... been there and done that... me time IS rare at that stage... I just was not sure if I sent the PM correctly... Its all good... looking forward to the piece of mind of not being worried every time I drive through water and rocks...
Thanks again,
Brian

[STL]

The reason it won't' fit a 5 speed is that the bottom "lip" guiding the air into the rad is different ...It could be done though. Just have to make a little adapter bracket of some sort.

If it could be done i would be very interested. Would a L300 LHD plate be identical to a RHD one + I have no bullbar? ... still have to find a cheap courrier though.

Thanks.

STL

[Schwartz's Deli]

I think CVI in Richmond has still a few left from fishslapper's skid plates

Not any more

[fexlboi]

If you guys are interested how I modified the skid plate to fit in on a 5spd, here is my post: http://dinoevo.de/2010/03/front-skid-plate/

[after oil]

id get one this time around....

[jwfchase]

IMG_resize_0006.jpg (131.27 KiB) Viewed 6989 times

Couldn't resist... (One of Fishslapper's plates from the last time)

[Jsq]

Count me in too. Thanks for posting the photo Jwfchase, that sold it for me.

(... and I was perfectly content with my old skidplate till I looked over the fence!)

[fishslapper]

Come hell or high water i will get a quote and put an order in for 10 more skid plates this week !! (provided aluminum has not gone up to 1000 dollars a sheet)

checker plate or smooth aluminum........... ???? what does everybody want this time ??

cheers isaac

[Jsq]

Yeah I'm going with smooth too now.

(read After Oil's comment about chamonix and did a search for a photo. Thinking of replacing my bullbar plastic trim with a custom metal one. Don't want to mix and match so close together.)

[after oil]

Come hell or high water i will get a quote and put an order in for 10 more skid plates this week !! (provided aluminum has not gone up to 1000 dollars a sheet)

checker plate or smooth aluminum........... ???? what does everybody want this time ??

cheers isaac

i think i prefer smooth, its like the stock chamonix plate

[Meanman]

I'm in on this too please!! I don't care whether its smooth or checker plate as long as its strong. Although if it is smooth I can see myself spending hours polishing it every couple of weeks just because I'm retarded like that!

[MitsuDeli]

My first choice would be smooth... That would be a different look...